Foundation Isolation - Fabreeka International - #3

Text version of the page

4 Introduction
The purpose of isolation is to control unwanted vibration sothat its adverse effects are kept within acceptable limits. 4 5 Background
When is a foundation (inertia block, reaction mass) required? In certain applications, it is not desirable or feasible to mount a machine directly on vibration isolators. An integral part of many machine tool and equipment installations is a properly designed and isolated foundation. 8 8 Design Services
Our Engineering group will assist you with design solutions for your machinery or equipment foundation including; structural design and dynamic analysis, finite element modeling and modal analysis, if required. 12 Vibration Isolators
A brief discussion regarding isolator natural frequency, static and dynamic spring rate, damping and transmissibility, includ- ing types of isolators and isolator performance. 15 15 FABSORB
TM 32 Fabsorb™ isolation material is an economical approach tofoundation isolation where high frequency vibration control isrequired. 19 FAB-EPM and INFAB
TM These vibration isolation materials provide low frequency isola-tion, ease of installation and design flexibility to meet a wide range of applications. 37 36 Pneumatic Isolators and Air Bags
Pneumatic isolators provide exceptional low frequency and shock isolation for sensitive machines and equipment. Air bag isolators allow for large displacements (stroke) where solutions require the same. 36 37 Coil Spring Isolators
Heavy duty, large capacity spring isolators are used as a solu- tion when low frequency isolation and large dynamic deflec- tions must co-exist. 38 38 Vibration Measurement &Analysis
Fabreeka provides Vibration Measurement & Analysis services prior to and after installation to determine and/or verify the resultant amplitude and frequency of vibration at your facility. 3