video corpo

Heavu Duty Hydraulic NFPA Cylinder
64Pages

{{requestButtons}}

Catalog excerpts

Heavu Duty Hydraulic NFPA Cylinder - 1

HYDRAULIC HEAVY DUTY Series HHD 3000 PSI RATED WARNING IMPROPER SELECTION, IMPROPER USE OR FAILURE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN CAN CAUSE PROPERTY DAMAGE, PERSONAL INJURY AND/OR DEATH. The information contained herein and other information from Fabco-Air provides product and/or system information for further investigation by users having expertise. It is the sole responsibility of the end user to analyze all aspects of your application and any consequences of any failure and to review the information about the product or system in the current catalog. Based on the vast amount of applications and operating conditions it is the sole responsibility of the end user, through its own testing and analysis, for making the final decision as to product selection and assuring all performance, safety and warning requirements of the application are met.

Open the catalog to page 1
Heavu Duty Hydraulic NFPA Cylinder - 2

S ER IES H H D F E AT U R E S See "How to Order" guide - page 5. See "Pressure Rating" notes page 4. 1. HEAD/CAP- Precision machined steel head and cap provide close concentricity and accurate alignment between piston, tube, piston rod and rod bearing. 2. CYLINDER BARREL- Damage resistant, heavy wall steel tubing, honed to an 8 to 16 micro finish for low frictional drag and maximum seal and piston bearing life. 3. ROD CARTRIDGE- Extra long, high strength bronze gland provides maximum bearing support and wear resistance. With certain exceptions, a removable retainer allows for gland removal...

Open the catalog to page 2
Heavu Duty Hydraulic NFPA Cylinder - 3

SIDE LUGS SIDE TAPPED CENTER-LINE LUGS HEAD RECTANGULAR FLANGE HEAD RECTANGULAR INTEGRAL FLANGE HEAD SQUARE INTEGRAL FLANGE BOTH ENDS TIE RODS EXTENDED CAP RECTANGULAR INTEGRAL FLANGE HEAD SQUARE FLANGE HEAD TIE RODS EXTENDED CAP SQUARE INTEGRAL FLANGE PIVOT MOUNTS – CLEVIS AND TRUNNION STYLE P1 FIXED CLEVIS HEAD TRUNNION INTERMEDIATE FIXED TRUNNION PAGE 10 NFPA-MPU3 EXTENDED KEY PLATE SPHERICAL BEARING (ADD “S” IN PART # AND STATE EXTENDED KEY PLATE IN DESCRIPTION) (ADD "DR" AFTER MOUNT STYLE) HEAVY DUTY HYDRAULIC CYLINDERS ARE DESIGNED TO ACCEPT STANDARD MOUNTING ACCESSORIES. PAGES 33-35...

Open the catalog to page 3
Heavu Duty Hydraulic NFPA Cylinder - 4

SERIES HHD • PRESSURE RATINGS Note: Certain small bore cylinders have full plate retainers which means the RR is not applicable. Use "F" dimension instead of "RR" Note: 2 1/2" and larger rod retainer rings are counter-bored so the socket head cap screws are not exposed. Specifications and prices are subject to change without notice or incurring obligations. FABCO-AIR, Inc., 3716 N.E. 49th Avenue, Gainesville, FL 32609 • www.fabco-air.com

Open the catalog to page 4
Heavu Duty Hydraulic NFPA Cylinder - 5

FABCO-AIR i hhd i[gn[A 32_ ni 1 irnrnm NOTE: SEE PAGE 57 FOR PORT LOCATION Ordering Example Series MS4 side tapped mounting Hyphen, double rod not required No cushions 3-1/4 bore (use code #, see page 4.) Nitrile U-cup (standard) piston seals Stroke (always use 2 place decimal) SAE (standard) ports Rod diameter (always use 2 place decimal) Twin lip (standard) hydraulic rod seals Standard male rod end Hyphen, no specials requirement Head port location Cap port location Specifications and prices are subject to change without notice or incurring obligations.

Open the catalog to page 5
Heavu Duty Hydraulic NFPA Cylinder - 6

SE R IE S H H D SIDE LUGS MOUNT SIDE TAPPED MOUNT (SEE PAGE 4) CENTER-LINE LUGS MOUNT NOTE: STANDARD CUSHION LOCATION IS POSITION 3 FOR THIS S3 MOUNT. † HEAD END PORTS SHALLOW TAPPED (SOME BORES WITH OS RODS) ∆ (2) SPANNER HOLES USED INSTEAD OF FLATS (DIMENSION 'D' COLUMN) ON 3-1/2” DIA. AND LARGER RODS § THESE CYLINDERS HAVE FULL PLATE RETAINERS. USE "E" DIMENSIONS INSTEAD OF "RM." USE "F" DIMENSIONS INSTEAD OF "RR" – SEE PAGE 4 ‡ B DIMENSION TOLERANCE -.001/ -.003 * SS DIMENSION CHANGES ON DOUBLE ROD CYLINDERS – SEE PAGE 31 FOR DETAILS NOTE: SUGGESTED THAT THESE MOUNTS BE KEYED OR PINNED...

Open the catalog to page 6
Heavu Duty Hydraulic NFPA Cylinder - 7

1 1/2 THRU 8 BORE • SERIES HHD Specifications and prices are subject to change without notice or incurring obligations.

Open the catalog to page 7
Heavu Duty Hydraulic NFPA Cylinder - 8

SIDE END LUGS MOUNT HEAD END PORTS SHALLOW TAPPED (SOME BORES WITH OS RODS) (2) SPANNER HOLES USED INSTEAD OF FLATS (DIMENSION D COLUMN) ON 3 1/2" DIA. AND LARGER RODS B DIMENSION TOLERANCE -.001/ -.003 SE, XE & ZE DIMENSION CHANGES ON DOUBLE ROD CYLINDERS – SEE PAGE 31 FOR DETAILS. THESE CYLINDERS HAVE FULL PLATE RETAINERS. USE "E" DIMENSIONS INSTEAD OF "RM." USE "F" DIMENSIONS INSTEAD OF "RR" – SEE PAGE 4 NOTE: SUGGESTED THAT THESE MOUNTS BE KEYED OR PINNED TO PREVENT SHIFTING - SEE PAGE 30 NOTE: BOTTOMS OF HEAD AND CAP ARE MOUNTING SURFACES. LUGS HOLD CYLINDER AGAINST MOUNTING SURFACE....

Open the catalog to page 8
Heavu Duty Hydraulic NFPA Cylinder - 9

1 1/2 THRU 8 BORE • SERIES HHD Specifications and prices are subject to change without notice or incurring obligations.

Open the catalog to page 9
Heavu Duty Hydraulic NFPA Cylinder - 10

SPHERICAL BEARING MOUNT † HEAD END PORTS SHALLOW TAPPED (SOME BORES WITH OS RODS) ∆ (2) SPANNER HOLES USED INSTEAD OF FLATS (DIMENSION 'D' COLUMN) ON 3 1/2” DIA. AND LARGER RODS § THESE CYLINDERS HAVE FULL PLATE RETAINERS. USE "E" DIMENSIONS INSTEAD OF "RM." USE "F" DIMENSIONS INSTEAD OF "RR" – SEE PAGE 4 ‡ B DIMENSION TOLERANCE -.001/ -.003 EYE DESIGNED TO FIT FABCO STD SPHERICAL CLEVIS BRACKET - SEE PAGE 35 NOTE: PU3 MOUNT MAX OPERATING PSI BASED ON STANDARD COMMERCIAL BEARING RATINGS. SEE PAGE 11 NOTE: PU3 MOUNT DOES NOT INCLUDE PIVOT PIN NOTE: STANDARD CUSHION LOCATION IS POSITION 2...

Open the catalog to page 10
Heavu Duty Hydraulic NFPA Cylinder - 11

1 1/2 THRU 6 BORE • SERIES HHD Specifications and prices are subject to change without notice or incurring obligations.

Open the catalog to page 11
Heavu Duty Hydraulic NFPA Cylinder - 12

CAP FIXED CLEVIS MOUNT † HEAD END PORTS SHALLOW TAPPED (SOME BORES WITH OS RODS) ∆ (2) SPANNER HOLES USED INSTEAD OF FLATS (DIMENSION 'D' COLUMN) ON 3 1/2” DIA. AND LARGER RODS § THESE CYLINDERS HAVE FULL PLATE RETAINERS. USE "E" DIMENSIONS INSTEAD OF "RM." USE "F" DIMENSIONS INSTEAD OF "RR" – SEE PAGE 4 ‡ B DIMENSION TOLERANCE -.001/ -.003 * CLEVIS DESIGNED TO FIT FABCO STD EYE BRACKET - SEE PAGE 34 "EYE" DESIGNED TO FIT STD FABCO CLEVIS BRACKET - SEE PAGE 33 NOTE: P3 MOUNT DOES NOT INCLUDE PIVOT PIN NOTE: STANDARD CUSHION LOCATION IS POSITION 2 UNLESS OTHERWISE SPECIFIED BY THE CUSTOMER...

Open the catalog to page 12

All FABCO-AIR catalogs and technical brochures

  1. FKHT Series

    4 Pages

  2. FVH-16

    1 Pages

  3. FKHQ Gripper

    4 Pages

  4. Master Catalog

    200 Pages

Archived catalogs