| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | Double Acting, Single Rod Models | | |
| | | |
| | | 032 - 0100 mm Bores | | |
| | | |
| | | 0N THRU HOLE (4) 00 C'BORE (8 ) 7 mm (0.28) - Slots (2) for Round Profile Sensors | | |
| | | Reed 25 mm (1.00) Electronic19 mm (0.75) | | |
| | | Sensors must be ordered separately. See page 37. | | |
| | | |
| | | |
| | | |
| | | m | | |
| | | Round Profile Sensor Shown | | |
| | | |
| | | T 0D | | |
| | | |
| | | |
| | | - P 2 PLACES | | |
| | | |
| | | - В + STROKE A + STROKE | | |
| | | |
| | | See page 37 for round profile sensors featuring surge suppression, polarity protection and dual output. | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | Tapped hole mounting | | | | | | | | | | , / | | | | | | A Note: | | | | | jam l\ut . ItJ | с | | | | | | О THREAD | Inch threads for W port code. Metric threads for 'G' & V port codes. Metric for foot, flange, or clevis mount. | | | | | | Included wu -k AF k k lm k | | | | | | BOTH ENDS | | | | | | | | | H | | | | | | | | | | | | | | | | | Bore | af(HEX) | H M (THREADS) | | LM | | Bore | | 0 (THREADS) | R | | | | | mm | inch or mm | inch or metric | | Inch or mm | | mm | | Inch or metric | Inch or mm | | | | | 12 | .34 or 8 | #8-32 x.31 Ig orM5x0.8-9lg | | 0.45 or 14.0 | | 12 | #8-32 or M4x0.7 | 0.43 or 11 | | | | 16 | .34 or 10 | #8-32x.31 Ig orM6x 1.0-10 Ig | | 0.45 or 15.5 | | 16 | #8-32 or M4x0.7 | 0.43 or 11 | | | | | 20 | .38 or 13 | #10-32 x .31 Ig orM8x1.25-12lg | 0.49 or 18.5 | | 20 | 1/4-20 or M6x1.0 | 0.67 or 17 | | | | | 25 | .43 or 17 | 1/4-28 x.37 Ig or M10x 1.25 -15 Ig | 0.57 or 22.5 | | 25 | 1/4-20 or M6x1.0 | 0.67 or 17 | | | | | 32 | .50 or 22 | 5/16-24 x.50 Ig orM14x1.5-20.5lg | 0.78 or 28.5 | | 32 | 1/4-20 or M6x1.0 | 0.67 or 17 | | | | | 40 | .56 or 22 | 3/8-24 x.63 Ig orM14x1.5-20.5lg | 0.91 or 28.5 | | 40 | 1/4-20 or M6x1.0 | 0.75 or 19 | | | | | 50 | .75 or 27 | 1/2-20 x.77 Ig orM18x 1.5-26 Ig | 1.08 or 33.5 | | 50 | 5/16-18 or M8x1.25 | 0.75 or 19 | | | | | 63 | .75 or 27 | 1/2-20 x.77 Ig orM18x 1.5-26 Ig | 1.08 or 33.5 | | 63 | 7/16-14 or M10x 1.5 | 0.87 or 22 | | | | | 80 | .93 or 32 | 5/8-18 x 1.00lg orM22x 1.5-32.5lg | 1.40 or 43.5 | | 80 | 1/2-13 or M12x 1.75 | 1.13or29 | | | | | 100 | 1.13 or 46 | 3/4-16 x 1.12 Ig orM26x 1.5-32.5lg | 1.59 or 43.5 | | 100 | 1/2-13 or M12x 1.75 | 1.13 or 29 | | | | | | | | | | | | | | | | | | | |
| | | |
| | | | | | | | | | | | | | | | | | к | L | M | 0N | 00 | *P | Q | W | Z | Bore mm (Norn. Inch) | | | | 5 (0.20) | 3.5 (0.14) | 22 (0.87) | 3.5 (0.14) | 6.5x3.5 dp (0.26x0.14 dp) | M5x0.8 | 7.0 (0.28) | - | - | 12(1/2) | | | | 6 (0.24) | 3.5 (0.14) | 28 (1.10) | 3.5 (0.14) | 6.5x3.5 dp (0.26x0.14 dp) | M5x0.8 | 7.8 (0.31) | | | 16(5/8) | | | | 8 (0.31) | 4.5 (0.18) | 36 (1.42) | 5.5 (0.22) | 9.0x7.0 dp (0.35x0.28 dp) | M5x0.8 | 8.1 (0.32) | - | - | 20 (3/4) | | | | 10 (0.39) 14 (0.55) | 5 (0.20) 7 (0.28) | 40 (1.57) 34 (1.34) | 5.5 (0.22) 5.5 (0.22) | 9.0x7.0 dp (0.35x0.28 dp) 9.0x7.0 dp (0.35x0.28 dp) | M5x0.8 1/8* | 8.4 (0.33) 8.7 (0.34) | 49.3 (1.94) | 16.5(0.65) | 25(1) 32(1-1/4) | | | | 14 (0.55) 17 (0.67) | 7 (0.28) 8 (0.31) | 40 (1.57) 50 (1.97) | 5.5 (0.22) 6.6 (0.26) | 9.0x7.0 dp (0.35x0.28 dp) 11.Ox8.0dp (0.43x0.31 dp) | 1/8* 1/4* | 9.2 (0.36) 10.5 (0.41) | 57.0 (2.24) 70.6 (2.78) | 17.8(0.70) 22.2 (0.88) | 40(1-1/2) 50(2) | | | | 17 (0.67) 22 (0.87) | 8 (0.31) 10 (0.39) | 60 (2.36) 77 (3.03) | 9 (0.35) 11 (0.43) | 13.7x10.5 dp (0.54x0.41 dp) 16.8x13.5 dp (0.66 x 0.53 dp) | 1/4* 3/8* | 11.5 (0.45) 14.0 (0.55) | 83.6 (3.29) 104 (4.09) | 22.2 (0.88) 27.0(1.06) | 63 (2-1/2) 80 (3-1/4) | | | | 27 (1.06) | 12 (0.47) | 94 (3.70) | 11 (0.43) | 16.8x13.5 dp (0.66x0.53 dp) | 3/8* | 18.0 (0.71) | 121.9(4.80) | 27.0(1.06) | 100(4) | | | | | | | | | | | | | | | | | |
| | | |
| | | 5-5-06 | | 1 | | |
| | | Specifications subject to change without notice or incurring obligation. | | |
| | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |