WEDM tooling catalogue - F-Tool International AG F-Tool International AG - #9

Text version of the page

F-Tool frame pallet The F-Tool frame pallet 135 x 75 x 10 mm has a height of 10 mm only and is suited for the collet of thin plates <135 x 75 mm. The parts can be clamped with M6 screws sideways on plan-eroded pins. Parallel grinded plates with unmachined side faces can be clamped on small support beams. The frame pallet can be clamped directly with the basic ruler or be inserted in the F-Tool swivel table IF 22. The frame pallet is delivered completely with screws and 2 small clamping beams. Pallet dimension: 195 x 137 x 10 mm Clamping beam height: lips = -2 mm / strip from height zero = 16 mm F-Tool frame pallet The frame pallet 100 x 22 mm is an economic, universal clamping frame with variable clamping possibilities. The clamping frame can be charged with parts very simple outside the machine on a flat surface. Afterwards the clamping frame, charged with parts, is available for the handling with a few hand grips. The base frame consists of corrosion-resistant, not hardened high-grade steel. The surface or the provided hardened, corrosion-resistant cylinder bolts provide optionally a stopper for the parts. The clamping beam is delivered completely with screws, keys, cylinder bolts and jacks. Pallet dimension 170 x 150 x 22 mm Article no. Article Quantity Weight Code FT 01360 FTool frame pallet 100 x 22 mm 1 piece 3.28 kg W Article no. Article Quantity Weight Code FT 01353 FTool frame pallet 75 x 75 x 10 mm with clamping beam 1 piece 1.20 kg W FT 01573 FTool frame pallet 75 x 75 x 10 mm without clamping beam 1 piece 0.85 kg W F-Tool frame pallet The F-Tool frame pallet 75 x 75 x 10 mm has a height of 10 mm only and is suited for the collet of thin plates <75 x 75 mm. The parts can be clamped with M6 screws sideways on plan-eroded pins. Parallel grinded plates with unmachined side faces can be clamped accurate on small support beams. The frame pallet can be inserted directly in the corner set 85, in the palletset W adapter, the F-Tool swivel table with IF 22 or in the ER swivel. The frame pallet is delivered completely with screws and 2 small clamping beams. Pallet dimension: 130 x 105 x 10 mm Clamping beam height: lips = -2 mm / strip from height zero = 16 mm F-Tool universal pallet The universal pallet is a multifunctional clamping frame for round and square parts. The universal pallet can be charged with parts very simple outside the machine on a flat surface, like the frame pallet, and is available anytime for the application on the machine. The base frame consists of corrosion-resistant, not hardened high-grade steel. The surface or the provided hardened, corrosion-resistant cilynder bolts provide optionally a stopper for the parts. The universal pallet is delivered completely with screws, keys, cylinder bolts and jacks. Pallet dimension: 200 x 140 x 22 mm Article no. Article Quantity Weight Code FT 01361 FTool universal pallet 22 mm 1 piece 3.80 kg W F-Tool blank pallet The end user can cut his forms by himself analog the universal pallet or the frame pallet. Pallet dimension: 160 x 100 x 22 mm Article no. Article Quantity Weight Code FT 01362 FTool blank pallet 22 mm 1 piece 2.75 kg W Article no. Article Quantity Weight Code FT 01444 FTool frame pallet 135 x 75 x 10 mm with clamping beam 1 piece 1.90 kg W FT 01574 FTool frame pallet 135 x 75 x 10 mm without clamping beam 1 piece 1.50 kg W F - T o o l W E D M c l a m p i n g e l e m e n t s Combination examples: FT 01044 3R chuck 80 FT 01362 blank pallet 22 mm FT 01765 square 25 front part FT 01362 blank pallet 22 mm