ECOFLOW
2Pages

PRODUCT DATA SHEET AFM Abrasive Flow Machining The versatile answer to Abrasive Flow Machining on a budget ++ Media cylinder Available with different size of media cylinders: 80mm (3.15“) or 100mm (3.8“). The ECOFLOW series machines are specifically designed for the small die maker or job shop owner. It is the ideal economical alternative for processing carbide dies for precise and repeatable surface finish improvement as well as short-run polishing and radiusing of surfaces and edges of critical components. ECOFLOW is the solution when there can be no compromise in edge and surface improvement conditioning. ++ Media stroke Stroke is 250mm (9.8“). The ECOFLOW machine uniformly smooths and blends in features, automatically and controllably, to the same quality level as its larger counterparts in the Extrude Hone AFM Product Portfolio. AFM technology can consistently finish internal curved and complex surface locations which are unreachable by any other means. ++ Control panel Equipped as standard with Siemens touchscreen HMI. ++ Media flow rate and pressure Flow rates are between 4,1 L/min and 6,5 L/min and pressure respectively between 207 bar (3000 psi) and 140 bar (2000 psi). ++ Clamp system Fully hydraulic with clamp system with interval of 250mm (9.8

TECHNICAL INFORMATION AFM ECOFLOW MACHINE SPECIFICATIONS Dimensions: (W x D x H) Table height Working area surface (W x D) Maximum weight supported by the table Clamping System: Stroke 250mm (9.8”) without tooling plates 0mm (0”) without tooling plates Media System: Media cylinder diameter Media stroke length Media capacity Min media pressure Max media pressure Media flow rate Hydraulic Unit: Maximum pressure Pump flow rate Tank capacity ELECTRICAL SPECIFICATIONS MACHINE FEATURES The machine is PLC controlled with Siemens PLC. Optimized aluminum extrusion frame construction maximizes...