video corpo

C250
2Pages

{{requestButtons}}

Catalog excerpts

C250 - 1

PRODUCT DATA SHEET C250 Reliable and fast deburring system concentrates maximum economy into minimum machine space The C250 thermal deburring machine is designed to be a reliable and flexible deburring system. The C250 features a "C" throat press frame with a ram and toggle style locking mechanism that allows for fast cycle times and increased throughput. The C250 thermal deburring machine, designed for a max closing pressure of 250 US tons (2,224 kN), is available with three different chamber diameters -7" (175mm), 8" (200mm), or 10" (250mm) - for perfectly meeting individual customer requirements. + Robust machine frame Ram and toggle provides mechanical locking of combustion chamber and fast cycle times. + Water cooling of the deburring chamber Enables system to be used in continuous operation. + Hydraulically operated gas charging system Achieves consistent quality with high-precision gas delivery system. + User-friendly HMI with touch screen interface Facilitates quick set ups and fine-tuning of parameters, convenient machine monitoring and operation, and integral fault diagnostics. + Touch screen interface Convenient machine monitoring and operation. + Robust design Hundreds in use in harsh environments. + Enhanced safety Redundant ignition detection by thermocouple and accelerometer feedback. Five process stations located on an indexing table allow the C250 to perform high production deburring, while a stainless steel upper combustion chamber surrounded by a continuous flow water cooling ring ensures reliable operation.

Open the catalog to page 1
C250 - 2

TECHNICAL INFORMATION 115.5 inch (2934 mm) 104.5 inch (2655 mm) CLEARANCE HYDRAULIC POWER UNIT ELECTRICAL MAIN PANEL ELECTRICAL SPECIFICATIONS MACHINE SPECIFICATIONS The operator interface is located in the front of the machine, with the control cabinet mounted to the side. The machine control unit is a Programmable Logic Controller (PLC). Working cycle can either be sequenced manually in single step mode or started in automatic mode. Loading Height from Floor Part Loading (standard) Manual loading, 5 stations Cycle time Electrical Supply Voltage Control & Valve Voltage Main Switch Controls...

Open the catalog to page 2

All Extrude Hone® catalogs and technical brochures

  1. T350 - T450

    2 Pages

  2. CLASSIC

    2 Pages

  3. SPECTRUM

    2 Pages

  4. ECLINE

    2 Pages

  5. VECTOR

    2 Pages

  6. EASYFLOW

    2 Pages

  7. MICROFLOW

    2 Pages

  8. ONE WAY FLOW

    2 Pages

  9. ECOFLOW

    2 Pages

  10. HYDROM

    2 Pages