Catalogue E6018 Series Portable Thermometers
www.evikon.ee
print switch display
Page / 2
Evikon MCI - 81557, 14570
/ 2
See other catalogues for Evikon MCI
Text version of the page

EvikonEvikon

Sensor Technologies · Measurement & Control InstrumentationSensortehnika · Mõõtevahendid · Kontrollseadmed

Catalogue 2007

E6018 Series Portable Industrial thermometers 1.11

? Suitable for various applications? Verifiable for use in food and petrochemical handling ? Variety of interchangeable probes with stable Pt1000 sensors ? Measurement range -50..+500 ° C, resolution 0.1 / 1 ° C ? Hold, Min, Max, Auto-Off functions? 'Lifetime' battery Portable thermometer E6018 is a hand-held instrument for fast andaccurate measurement of temperature of different environments and objects (liquids, air, soft substances or solid surfaces) atmanufacturing, inspection, labs, etc. The thermometer is verifiable in Estonia for use in food and petrochemical handling (typeapproval TJI 5.3-1/15.09.05).The compact and lightweight device has an attractively designedimpact resistant enclosure providing protection against dust andsplashing water. Extremely low power consumption of the instrument allows more than five years of operation without battery change. Additional functions are holding last measured value ondisplay, indication of maximum and minimum value ofmeasurement period and automatic switch-off.E6018 complies with requirements of directives 89/336/EEC and94/9/EC (ATEX) and bears adequate CE marking. The instrumentbelongs to category 3 of class II and is allowed to be used inpotentially explosive atmospheres in zones 2 and 22.The thermometer is verifiable with one fitted probe (a completeset) or with several interchangable probes (a combined set). Thecomplete set has higher accuracy.Instrument measurement range -50...+500 °C (actual range depends on the probe) Resolution in the range -50...+200 °C +200...+500 °C 0.1 °C 1 °C Accuracy in the range -50...50 50...100 100...200 200...500 °C combined set ± 0.5 ± 0.6 ± 0.8 ± 4 °C complete set ± 0.3 ± 0.5 ± 0.6 ± 3 °C Sensing element: Pt1000 EN60751, class A or B Supply: 3.6 V Lithium Thionyl Chloride element, lifetime >20 000 h Display: LCD, 3.5 digits, digit height 10 mm Operating conditions: -10...+40 °C, <90 %RH, protection IP65A variety of sensing probes for various applications: - T160A and T152A pierce-in probes, sharp-tipped s/s stem - T153, T155 and T159 push-in probes, flat-tipped s/s stem - T111A surface probe with flat end - T171A air sensor with ventilated sensing element The special thermometer version E6018-T45 with an attached up to2.5 m long stainless steel stem is intended for deepmeasurements in heaps of pulverous substances (e.g. peatstacks), in water or fuel tanks, etc.The version E6015-CR with a industrial cable reel and a submersion probeenables measurement in tanks up to 30 m deep, e.g. atpetrochemical inspection.

E6018-T45 E6018-CR

Evikon Pt1000 RTD -50..+500 °C ThermometerE6018 HOLDMINMAX Pt1000 RTD -50..+500 °C 130 HOLDMINMAX Pt1000 RTD -50..+500 °C ThermometerE6018

-V-H-T-S

HOLDMINMAX Evikon ThermometerE6018 Evikon
65 25 BNC

T160AT153..T159T152AT111AT171A

150 140
Ø4 L 140
Ø6 200 100
Ø6 215
Ø17 180
L = 1000..2500 Ø15 360 Pt1000 RTD -50..+500 °C HOLDMINMAX ThermometerE6018 Evikon Ø10..16 Ø4 280 50

Evikon MCI OÜ Riia 185, 51014 Tartu, Estonia Tel:+372 7336310 Fax:+372 7383041 www.evikon.ee info@evikon.ee

DirectIndustry's Virtual Technical Library: PDF Catalogue | Technical Documentation | Brochure | Manual | Industrial directory | Specifications | Characteristics
Search Go
page 1 p.1
page 2 p.2