Text version of the page

Accessories

Accessories - 23595 Calibration Sachets (20 x 20 ml Per Box)

Economical NIST-traceable sachets for quick, accurate and convenient calibrations. Simply insert electrode into sachet pack, calibrate, rinse and discard sachet – no separate container needed!

Order CodePart No.DescriptionpH Bu er Sachets (20 x 20 ml Per Box) ECBU4BS01X223102 pH 4.01 buff er sachets (NIST traceable) ECBU7BS01X223101 pH 7.00 buff er sachets (NIST traceable) ECBU10BS01X223103 pH 10.01 buff er sachets (NIST traceable) ECRINWT01X223201 pH deionized water rinse sachets (NIST traceable) Conductivity/Salinity Sachets (20 x 20 ml Per Box) ECCON10BS01X219905 10 µS/cm KCl Conductivity sachets ECCON447BS01X219902 447 µS/cm KCl Conductivity sachets ECCON1413BS01X219901 1413 µS/cm KCl Conductivity sachets ECCON2764BS01X219903 2764 µS/cm KCl Conductivity sachets ECCON15000BS01X219904 15000 µS/cm KCl Conductivity sachets ECCON3000BS01X219906 3000 ppm KCl Salinity calibration sachets

Buffer Tablets (Box of 100 Tablets) – For Use with Testers Only

These buffer tablets are perfect for small volumes of pH buffers needed for calibration of pocket pH testers. Simply dissolve a tablet in 30 ml of fresh distilled water; calibrates up to ±0.1 pH accuracy.

Order Code Part No.DescriptionpH Bu er Tablets (10 Strips x 10 Tablets Per Box) ECBU4BX01X038201 pH 4 buff er tablets ECBU7BX01X038202 pH 7 buff er tablets ECBU10BX01X038203 pH 10 buff er tablets

Precision pH Simulator

The Eutech pH-millivolt simulator is a handy, easy-to-use service tool for testing the accuracy of your pH meter. Used for trouble-shooting and fault diagnosis of meters, the simulator works with most pH/redox instruments with BNC connectors. Simulator comes with a BNC cable and a sturdy rubber boot which doubles up as a stand. • Push button pH/mV selection • Large display with bright LED • pH accuracy of ±0.05; mV range of ±2 • Splashproof keypad • USA/NIST pH buffer standards simulation • Protective rubber boot doubles up as stand • 16 combination values • Power-saving meter runs on 4 ‘AAA’ x 1.4 V batteries • 1 GΩ high input impedance test

Order Code Part No.Description ECPHSIMULATOR01X373301 Precision hi-low impedence and multiple buff er pH simulator (with BNC-BNC cable provided)

Electrode Stand with Swivel Arm

Electrode stand with swivel arm allows convenient hands-free operation. Holds up to four standard size electrodes and one ATC probe. • Weighted 6-inch diameter base allows you to pivot holder 360 ° for more flexibility• Arm allows you to move electrode side to side or up and down while keeping electrode at a constant verticle angle

Order Code Part No.Description ECPHELSTDC01X081600 Electrode stand with swivel arm

page | 115