MicroCal PM200 - Eurotron Instruments - #8

Text version of the page

MicroCal PM200 System High Accuracy Signal and Pressure Calibrator Specifications may change without notice PRESSURE CALIBRATORS Pressure module with internal pump MicroCal PM200 3226 - A - B - C - D - E - F - G The Multifunction Pressure Calibrator requires a MicroCal 200 to operate. The basic MicroCal PM200 System is equipped with pressure sensor(s) and supplied with a set of fast coupling of pneumatic connectors, a leather carrying case, a Report of Calibration and an Instruction Manual. Table A Signal Calibrator 0 None (customer has one MicroCal 200 available) 6 MicroCal 200 cat.3916 8 MicroCal 200+ cat.3918 9 MicroCal 2000+ cat.3928 Table B Signal Calibrator mains power supply 0 None (only for A=0. The pressure module is powered by Microcal 200) 1 120 V USA plug 2 230 V Schuko plug 3 240 V UK plug 4 230 V European plug 5 100 V USA/Japan plug Table C Pressure Module/Internal Sensors (only for non-reducing, non-corrosive, non-condensing and non-explosive gases) 0 No internal sensors. Only external sensors capabilities. 1L Dual from vacuum -0.8 to 500 mbar and from -0.8 to 20 bar automatic selection (Gauge and differential) 1 Dual from vacuum -0.8 to 2 bar and from -0.8 to 20 bar automatic selection (Gauge and differential) 2 Single from vacuum -0.8 to 2 bar (Gauge) 3 Single from vacuum -0.8 to 20 bar (Gauge) 4 Dual from vacuum -0.8 to 2 bar (Gauge and differential) 5 Dual from vacuum -0.8 to 20 bar (Gauge and differential) 6 Dual from 0 to 2 bar and from 0 to 20 bar automatic selection (Absolute and differential) 7 Single from 0 to 2 bar (Absolute) 8 Single from 0 to 20 bar (Absolute) 9 Dual from 0 to 2 bar (Absolute and differential) A Dual from 0 to 20 bar (Absolute and differential) Z Special Table D Pumps 0 None 1 Built in 20 bar only pressure 5 Built in from -0.8 to 20 bar pressure and vacuum 6V External hand-held from -0.8 to 2 bar (F3280013) 7X External hand-held from-0.8 to 40 bar (F3280019) 8H External hand-held 350 bar hydraulic (F3280018) 9 External hand-held 700 bar hydraulic (F3280015) Table E Accessories 0 None 2 BSP kit** each kit include: n.1 1/8" BSPM (EE170067) n.1 1/4" BSPM (EE170069) 4 NPT kit ** each kit include: n.1 1/8" NPTM (EE170068) n.1 1/4" NPTM (EE170070) 6 Electrical signal test lead kit (EE300040) 8 Rilsan tube holder (EE170066) + 2 m Rilsan tube F6/4 mm (EE370048) A CalpMan software for PC (BB260097) C LinMan software for PC (BB260096) E LogMan software for PC (BB260095) G TTL/RS232 isolated adapter (BB530004) Table F External pressure sensors 0 No External pressure sensors 1 35 bar (Gauge) 316SS (EE830050) 3 70 bar (Gauge) 316SS (EE830051) 5 150 bar (Gauge) 316SS (EE830052) 7 350 bar (Gauge) 316SS (EE830053) 9 700 bar (Gauge) 316SS (EE830054) Z Special (differential, brometric and absolute) Table G Report of Calibration 1 Eurotron Report Example: To order a MicroCal PM200 System composed of a MicroCal 200+ signal calibrator with European plug, a dual internal gauge sensors from -0.8 to 20 bar, a built_in vacuum/pressure pump, n.3 tube holder, n.2 BSP kits, a CalpMan software, 70 bar and 350 bar external sensors and Eurotron Report of Calibration, use the code 3226-8-4-1-5-22A-37-1 Note: ** Two kits are required if dual internal sensor are ordered bar PSI 2 20 35 70 150 350 700 30 300 525 1050 2250 5250 10500 Ordering Code F3280013 F3280018 19” pannel mounting External pressure sensor F3280019 36 F3280015