MicroCal MCK
On-board marine temperature,
pressure & electrical calibration kit
Specifications may change without notice.
MULTIFUNCTION
CALIBRATORS
MicroCal TCS MARINE
Dry Block Calibrator
Temperature range 35 to 650°C
Insert holes 2 x Ø4.5mm - 2 x
Ø6.4mm 1
x Ø8mm - 1 x Ø9mm
Well depth 148 mm
Power supply 230V AC (110Vac on
request)
Accessories Tweezer, calibration
certificate, vinyl
carrying case with
shoulder strap
cat. 8165
F2184200
Pt100 Class A working standard
High stability and repeatability
4-wire Pt100 probe for best
accuracy temperature calibration
Accessories
F3280015
and pressure up to 700 bar
EE170049 Adapter Kit for MicroCal 20
external pressure module
Hand pump for vacuum
EE372008 - 1000 bar hydraulic hose
4-laywer low distorsion tube, made in stainless steel
and Naylon with a disconnections system from the
circuit with low-loss valve. The tube comes with two
safety connectors/adapters with 1/4" BSPM plug
and connector for the hydraulic pump.
Pressure Range: -1 to 35 bar gauge
0 to 700 bar gauge
Accuracy: 0.025% F.S.
Direct connection
to the MicroCal 20
calibrator
MicroCal P4 - Compact pressure indicator
Pressure range: 35 bar
Accuracy: 0.2% F.S.
Data memory for 10,000 measurements
22 selectable measurements units
ATEX model available
External pressure module
for MicroCal 20DPC
Ordering Codes
3250
Code Model
0 none
M20B-STD Multifunction, 2-channel
calibrator MicroCal 20 Basic
M20B-IS Multifunction, 2-channel Intrinsically Safe ATEX approved
calibrator MicroCal 20 Basic IS
M20P-STD Multifunction, 2-channel
calibrator MicroCal 20 Plus + 35bar external pressure sensor + 40bar pneumatic pump+ adapters
M20P-IS Multifunction, 2-channel Intrinsically Safe ATEX approved
calibrator MicroCal 20 Plus IS + 35bar internal pressure sensor + 40bar pneumatic
pump+ adapters
0 none
P4-STD-35 Digital pressure indicator MicroCal P4, 0.2% FS accuracy, 35 bar relative pressure sensor + 40 bar pneumatic pump + adapters
P4-IS-35 Digital pressure indicator Intrinsically Safe ATEX approved MicroCal P4, 0.2% FS accuracy, 35 bar relative pressure sensor + 40 bar
pneumatic pump + adapters
P100-40 Pressure
calibrator MicroCal P100, 0.2% FS accuracy, 35 bar relative pressure sensor + 40 bar pneumatic pump + adapters
P100-700 Pressure
calibrator MicroCal P100, 0.2% FS accuracy, 700 bar relative pressure sensor + 700 bar hydraulic pump + adapters + high
pressure hose
M20-EXT35 External relative pressure sensor for MicroCal 20, 0.025% FS accuracy, range 35 bar + 40 bar pneumatic pump + adapters
M20-EXT700 External relative pressure sensor for MicroCal 20, 0.025% FS accuracy, range 700 bar + 700 bar hydraulic pump + adapters + high
pressure hose
Table B - Pressure Calibrators
0 none
T30 MicroCal T30 dry block
calibrator - range Tambient to 300°C
TCS Marine MicroCal TCS Marine dry block
calibrator - range 35°C to 650°C supplied with vinyl carrying case
Table C Temperature Calibrator
3250 - M20B-IS - P100-40 - T30 - EUR Typical Ordering Code
Table A - Electrical Signal Calibrators
High visibility water proof marine case, 1 MicroRay PRO infrared thermometer, a set of BSP and NPT adapters instruction manuals,
Eurotron calibration certificate.
USA 120 V 50/60 Hz with USA plug
SCK 230 V 50/60 Hz with Schuko plug
UK 230 V 50/60 Hz with UK plug
EUR 230 V 50/60 Hz with European plug
JAP 100 V 50/60 Hz with USA/Japan plug
Table D Line Charger / Power Supply
54
