Panel Mount Solid State Relays - EUROTHERM PROCESS - (Version JPG) - PDF Catalogue | Technical Documentation

See other catalogues for EUROTHERM PROCESS

Chart recorder, Valve, Valve actuator, PLC, Recorder

Text version of the page

SV Series - Panel Mount Solid State Relays

FEATURES/BENEFITS

• 10 - 75 amps, 330Vac max.

• 50 - 75 amps, 660Vac max.

• Single phase, zero crossing

• LED input indicator

• Clear safety cover included

• Panel mount

DC and AC input versions

Superior surge survival

Meets EN60947-4-3

UL recognized, CSA listed,

CE approved

100% tested

PECIFICATIONS

Dimensions inches (mm):

Load type:

Inputs:

SVDA-DC Input

DC Logic: 10-25A 50-75A

2.25(57.1)H x 1.75(44.5)W x 1.37(34.8)D on vertical panel Resistive

See pages 6 and 17-19 for heat sinking

considerations and thermal transfer pads. See page 16 for fuse selector chart.

ON a 4Vdc/5.4mA, 32Vdc/10mA max., current limited ON a 4Vdc/3.5mA, 32Vdc/8mA max., current limited OFF s 1Vdc

ON a 100V, 280Vac max. OFF s 2mA, 10kO impedance 10A, 25A, 50A and 75A

3Vxx rating option: 24V to 330V max. 6Vxx rating option: 24V to 660V max.

0°C to 40°C (up to 80°C with derating)

10A-60, 25A-260, 50A-1620, 75A-7010

800V, impulse (300Vac), 1200V, impulse (600Vac)

300V 600V

10A-750V/usec 50A-500V/usec 25A-750V/usec 75A-500V/usec

50A-1000V/usec

75A-1000V/usec

SVAA-AC Input

AC Logic:

Current ratings: Voltage ratings:

Operating temperature: I²t (A²/secs): Peak blocking voltage: Offstate dVdT:

ORDERING CODES


Model		Rating
SVDA	4-32Vdc input,	3V10	10 amps, 300 volts
	AC output	3V25	25 amps, 300 volts
SVAA	100-280Vac input,	3V50	50 amps, 300 volts
	AC output	3V75	75 amps, 300 volts
		6V50	50 amps, 600 volts
		6V75	75 amps, 600 volts

Heat sinks and Accessories (mm)


	S505-heatsk-1.5	76.2 H x 111.8 W x 66.8 D
	S505-heatsk-1.0	139.7 H x 111.8 W x 66.8 D
	Heatsk-DIN-1.6	80 H x 60 W x 71.1 D
	Heatsk-DIN-1.0	116.59 H x 60 W x 86.3 D
	Heatsk-6pk-1.2	579 H x 60 W x 71.1 D
	Cover Safety-000	Clear Cover
	Thermal-pad-005	5 pack of thermal pads
	Thermal-pad-025	25 pack of thermal pads

SCHEMATICS/DIMENSIONS

DC Input

<l)-rF5ü~H

NOTE: Adequate heat sinking, including consideration of air temperature and flow, is essential to the proper operation of a solid state relay. Units should not be mounted in an enclosed area without proper air flow. Units should also never be mounted to a plastic base or to a painted surface. Failure to provide adequate heat sinking with thermal gel or pad will cause a solid state relay to fail.

See page 6 and pages 17-19 for more details.

. Zero voltagel detect

AC Line

Control Voltage

<j)-[B

AC Input


		en

	r

Continental Industries International

Panel Mount Solid State Relays - EUROTHERM PROCESS - #1

Chart recorder, Valve, Valve actuator, PLC, Recorder