Safety Switches with Metal Housing - EUCHNER GmbH + Co. KG - #10

Text version of the page

General 10 Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Attaching the safety switch TZ with actuating head fitted on left or right The drawings show that the attachment of the actuating head is very heavily dependent on how the switch is mounted. It is not possible to list all methods of attachment here, as the actuator head can be rotated in 90° steps. As a result there are a very large number of different methods of attachment. There is a suitable way of mounting the switch for every application. The safety switch TZ can be mounted in a large number of different installation positions. Often the switch is mounted horizontally on the roof of a machine or with a suspended actuating head. The method of attachment depends on whether the switch is to be attached in a protected installation position, for instance to make tampering more difficult, or whether the switch is to be mounted so that it is easily accessible as the escape release must be within reach from inside the system. Plan view Sliding door Sliding door Plan view TZ..L.. Approach direction E Plan view TZ..L.. Approach direction E TZ..R.. Approach direction E Plan view TZ..R.. Approach direction E TZ..L.. Approach direction E Plan view Plan view TZ..L.. Approach direction D TZ..R.. Approach direction D TZ..R.. Approach direction B TZ..L.. Approach direction B Plan view TZ..L.. Approach direction E TZ..R.. Approach direction E Door hinged on the right Door radius > 1000 mm Door hinged on the right Door radius > 1000 mm Door hinged on the right Door radius > 1000 mm Door hinged on the right Door radius > 1000 mm Plan view Door hinged on the right Door radius 1000 mm TZ..L.. Approach direction E TZ..R.. Approach direction E Attachment as for doors with more than 1000 mm radius, but use of a hinged actuator TZ..R.. Approach direction E Door hinged on the right Door radius > 1000 mm