Position Switches according to EN 50041 - EUCHNER GmbH + Co. KG - #39

Text version of the page

Position Switches according to EN 50041 Subject to technical modifications; no responsibility is accepted for the accuracy of this information. 39 Technical data Parameters Value Unit Housing material Anodized die-cast alloy Degree of protection according to IEC 60529 IP 67 Installation position Optional Mechanical service life 30 x 106 switching cycles Ambient temperature -25 to +80 (on request -40 °C) °C Weight Approx. 0.35 kg Actuator Spring actuator made of spring steel wire (FO) Approach speed, max. 20 m/min Approach speed, min. 0.5 m/min Actuating force, min. 5 N Switching elements ES 510 1 NC + 1 NO Switching principle Snap-action contact element Contact material Silver alloy, gold flashed Contact closing time < 4 ms Contact bounce time < 3 ms Rated impulse withstand voltage Uimp 2.5 kV Rated insulation voltage Ui 250 V Utilization category according to IEC 60947-5-1 AC12 Ie 10 A Ue 230 V AC15 Ie 6 A Ue 230 V DC13 Ie 6 A Ue 24 V Switching current min. at 10 mA Switching voltage 24 V DC Conventional thermal current Ith 6 A Short-circuit protection according to IEC 60269-1 (control circuit fuse) 10/6 A gG Type of connection Screw terminal 1) Conductor cross-section, max. 2 x 1.5 mm² 1) For wiring diagram see page 9. Order No. Type Series Roller Switching Element Function Display None L060 NG1...-M FO -510 079 911 090 029 Spring actuator Ordering example: Position switch without safety function NG, cable entry 1, Spring actuator made of spring steel wire FO, snap-action contact element 510, function display L060 10 - 60 V, metric thread M20 x 1.5 M NG1FO-510L060-M Order No. 090 029 Ordering table