Ident System CIS - EUCHNER GmbH + Co. KG - #19

Text version of the page

19 Ident System CIS3A Subject to technical modifi cations; no responsibility is accepted for the accuracy of this information. Inductive Ident System CIS A Low-cost read/write system with predominantly used, separate read-only heads Extremely compact head design, no separate interface adapter required Read distance maximum 28 mm Dynamic reading with a relative speed up to 2 0 mm/s Data carrier memory capacity 16 bytes E2PROM read/write Easy connection of the read-only heads to I/O on any control system via 4-bit parallel interface (24 V) Read/write heads with serial interface RS2 2 The ident system CIS3A is used if somewhat larger read distances are required. As a result a larger data carrier is necessary. The data carrier is screwed on the product to be identifi ed. The antenna and the interface electronics are fully integrated in the read heads and the read/write head. The data carrier and the head contain round-shaped antennae. The orientation of the data carrier in relation to the head is unimportant. This fact means that the data carrier can approach the head from any direction. The data carriers can be read when static or moving at low relative speed in front of the read head, i. e. on moving past. The data carrier must always be static for writing. ƒô ƒô ƒô ƒô ƒô ƒô ƒô