Catalogs >
ETS Lindgren >
POSITIONING EQUIPMENT

POSITIONING EQUIPMENT
2Pages

Catalog excerpts

For Radiated Emissions Measurements ■ Minimal Measurement Influence ■ EUT Placement Grid (10 cm2) Distributed Load Capacity of 100 kg (220 lb) Durable Construction ETS-Lindgren’s Low Dielectric Tables (LDT) are lightweight, portable test tables, constructed with materials selected for their low dielectric properties. The construction materials for the EUT's support surface have a dielectric constant of <3.0, with each table's support structures having a dielectric constant of <1.03. The result is a table having virtually no influence on radiated emissions measurements, especially above 1 GHz, where frequencies are affected most. For ease of use and accurate EUT positioning, an EUT placement grid is integrated onto the test table top. Standard Configuration ■ EUT Test Table Assembly The results were measured in accordance with CISPR 16-1-4 (Section 5.5; how to evaluate the test table's effect on radiated emissions measurements from 200 MHz to 18 GHz). The tests were performed in a validated 3-meter semi-anechoic chamber. LDT Tables are available in two sizes; 1.2 m x 1.0 (Model LDT-1.2) and 1.5 m x 1.0 m (Model LDT-1.5). Both test tables have a load capacity of 100 kg (220 lbs). Custom sizes are available; please contact ETS-Lindgren for details. Both LDT models are designed to be used with a 1.2 m diameter or larger turntable. Technical Specifications WETS-UNDGRENAn ESCO Technologies Company ets-lindgren.com

Open the catalog to page 1

Typical Performance up to 6 GHz 6 GHz to 18 GHz Data Available Upon Request An ESCO Technologies Company ets-lindgren.com Information presented is subject to change as product enhancements are made. Contact ETS-Lindgren Sales Department for current specifications.

Open the catalog to page 2