Pressurizing

Set the pressure with the allen T-wrench Set the pressure with the high pressure pumping Place the tool and HYDRO-GRIP on the machine professional spindle. Turn the allen T-wrench a couple of turns and the tool is automatically centered and fastened. The whole process takes literally just a few seconds. Connect the pumping to the HYDRO-GRIP, pressurize and check that the correct pressure of 400-450 bar has been reached.

Assembly

Permanent assembly Permanent assembly means that the sleeve only expands against the machine spindle. Made in short versions to allow for a light professional press fit. The tool and HYDRO-GRIP should be bolted together. Interchangeable assembly Interchangeable assembly means that the sleeve expands, is centered and fixed in place in a matter of seconds, both against the tool and the machine spindle. The sleeve can easily be used with different tools.
9