Innovations 2016 EN - 80 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

  9. P. 9

  10. P. 10

  11. P. 20

  12. P. 30

  13. P. 40

  14. P. 50

  15. P. 60

  16. P. 70

  17. P. 80

Catalogue excerpts

FAMIGLIA PRODOTTO TIPOLOGIA / DESCRIZIONE FAMIGLIA

 Open the catalogue to page 1

RACK SOLUTIONS THERMAL MANAGEMENT UPGRADE: MARKET REQUESTS

 Open the catalogue to page 3

E NUX RACK 19” AND NETWORKING SOLUTIONS FEATURES AND BENEFITS In full respect of the sustainability and compatibility philosophy, the system of suite cabinets E NUX can be integrated with a range of specific accessories for each solution. In certain applications, the wide range of 19” components, totally compatible with E NUX, represents the necessary completion of the cabinets: • full or partial height 19” rack frames with new modular concept • 19” rack uprights • rack frames • fixed or removable shelves • solid or punched 19” rack panels • accessories for ventilation • PDU and further accessories

 Open the catalogue to page 5

NEW DESIGN FOR A MODULAR CONCEPT EFFECTIVE, EASY-TO-INSTALL, STRONG Rack An innovative system consisting in a new frame, two horizontal rails and trim panels supplied according to the selected assembly: a modular concept to grant flexibility and a wide range of options. WTPR EUTR EUTR EUTA…C EUTA…C EUTA…D E NUX SOLUZIONI RACK 19” E PER NETWORKING RACK 19” AND NETWORKING

 Open the catalogue to page 6

• Higher structural stiffness • Deeper equipment can be installed LOAD CAPACITY (*) * oad capacity for single cabinet. For cabinets joined in a L suite, the load capacity can be increased by 60% • Higher resistance to dynamic stress • Easy to assemble • No adjustments needed KIND OF RACK FRAME CENTERED NOT CENTERED CENTERED NOT CENTERED • New rotating system thanks to the new interchangeable 110° and 180° hinges • 110° available for W=800mm too • Partial frames with standard WTPR rails • Solutions for special applications available (i.e. W=1200mm) • It can be assembled with dividing panels and...

 Open the catalogue to page 7

STEP 2 Choose the cabinet width and complete the frame with horizontal rails STEP 3 Select the position (centered or not) corresponding to the cabinet height and add the side trim panels STEP 4 Choose the assembly (full height, top/bottom, intermediate) and complete with the STEP 5 Complete the configuration with further accessories (full height) (top/bottom) (intermediate) E NUX RACK 19" AND NETWORKING SOLUTIONS

 Open the catalogue to page 8

Horizontal fixing rails RACK FRAME CODE Full height FURTHER ACCESSORIES Rack-stop 110°/135° EUFR-110135 ) For cabinets joined in a suite, the loading capacity can be increased by 60%

 Open the catalogue to page 9

Select HE and corresponding rack frame SWINGING RACK FRAME EUTR CHARACTERISTICS Rack frame manufactured from welded mild steel rails and horizontal profiles. PAINT FINISH ETA standard epoxy polyester powder coating. Colour: RAL 7035 textured finish. SWINGING RACK FRAME EUTR SUPPLY • rack frame complete with Ø 3mm double bar locking system • 110° rotating hinges complete with accessories • closing latches Note: rack frame 110° opening. For 180° opening, please add hinges EUCE-00180TR Note: for special painted cabinets, please add N to the code (i.e. EUTR004N). STEP 2 Choose the cabinet width and...

 Open the catalogue to page 10

STEP 4 Choose the assembly (full height, top/bottom, intermediate) and complete with the corresponding mounting kit MOUNTING KIT FOR RACK FRAME EUTR CHARACTERISTICS Different mounting kit according to the selected position of rack frame (top/bottom or intermediate position). SUPPLY Includes nr. 2 brackets, nr. 2 supports and closing latches complete with mounting accessories. MOUNTING KIT FOR RACK FRAME CODE ADDITIONAL ACCESSORIES FULL HEIGHT Nr. 1 x WTPR-……CP according to cabinet depth + WSTF-001CP Nr. 1 x WTPR-…… according to cabinet depth + WTSF-001 Note: for special painted cabinets, please...

 Open the catalogue to page 11

19” RAILS AEMK Designed for assembling 19” items or modular equipment on DIN rails. CHARACTERISTICS Manufactured from zinc sheet steel. SUPPLY Includes nr. 2 pieces. “L” RAILS AERL CHARACTERISTICS Manufactured from zinc sheet steel. SUPPLY Includes nr. 2 pieces. “L” RAILS AERL AERL CHARACTERISTICS Manufactured from zinc sheet steel. SUPPLY Includes nr. 2 pieces. “C” RAIL AERC AERC CODE E NUX RACK 19” AND NETWORKING SOLUTIONS

 Open the catalogue to page 12

DEPTH RAILS Rails for the mounting of 19” rack uprights on E NUX cabinets W=800mm. Manufactured from sendzimir sheet steel. SUPPLY Includes nr. 4 pieces BRACKETS AEP0070 Brackets manufactured from zinc sheet steel, used for the mounting of 19” uprights on cabinets W=600mm. SUPPLY Includes nr. 4 pieces. WIDTH RAILS AEP0098 Rails for the mounting of 19” rack uprights (AEMK, AERL, AERC) on E MOX and E VIS cabinets with W=800mm. Manufactured from sendzimir sheet steel. SUPPLY Includes nr. 2 pieces. Note: to be ordered separately AEP0070 (nr. 4 pieces) for the assembly of 19” rack rails. FRAME STOP...

 Open the catalogue to page 13

SHELF FOR FRONTAL FIXING EURI In addition to the front fixation, this shelf is locked with two other points on the inner side of the 19” profile/rail, to increase the load carrying capacity and the stability. Shelf (2 HE) with ventilation openings. Maximum load carrying capacity: 50 kgs. CHARACTERISTICS Manufactured from press bent sheet steel. SHELF FOR FRONTAL FIXING EURI PAINT FINISH ETA standard epoxy polyester powder coating. Colour: RAL 7035 textured finish. SUPPLY Includes 1 painted piece with mounting accessories. FIXED OR SLIDING SHELF EURI Shelf W=400mm with ventilation openings manufactured...

 Open the catalogue to page 14

EXTRACTABLE SHELF EURI000500SM Rotary support to be fixed on an extractable shelf, allowing to attach and extract any keyboard inside the 19” structure, with mouse area. CHARACTERISTICS Manufactured from press bent sheet steel. PAINT FINISH ETA standard epoxy polyester powder coating. Colour: RAL 7035 textured finish. SUPPLY Includes 1 piece complete with mounting accessories. BLANK CLOSING TRIM PANELS Used to divide the cold and hot airflow inside the cabinet. PAINT FINISH ETA standar polyester powder coating. Colour: RAL 7035 textured finish. SUPPLY Includes nr. 2 pieces. BLANK CLOSING TRIM...

 Open the catalogue to page 15

Manufactured from satinized aluminium or from sheet steel painted in RAL 7035 textured finish. SUPPLY Includes 1 piece. Note: to be ordered separately WT106 and WA107. RACK PANEL ALLUMINIUM 19’’ FRONT PANEL WITH OPENING EUPF030024 Designed to lodge equipment fixed on DIN rails. Front panel with modular slot that allows to lodge 24 modules, 18mm in width and 3 units in height. CHARACTERISTICS Manufactured from press bent sheet steel. PAINT FINISH ETA standard epoxy polyester powder coating. Colour: RAL 7035 textured finish. SUPPLY Includes 1 piece with mounting accessories. DIN PROFILE FOR PANEL...

 Open the catalogue to page 16

All E.T.A. S.P.A. catalogues and technical brochures

  1. ENERPOWER EN

    9 Pages

    En
  2. ABACUS EN

    2 Pages

    En
  3. E NEWS 2016 EN

    5 Pages

    En
  4. Product Overview

    16 Pages

    En
  5. General Catalogue

    348 Pages

    En
  6. Innovations 2011

    2 Pages

    En