ENERPOWER EN - 9 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

  9. P. 9

Catalogue excerpts

YOUR POWER, OUR PROTECTION

 Open the catalogue to page 1

ETA A reliable partner at your side With over thirty five years of experience in processing sheet steel, stainless steel and extruded aluminium, and as a leading Italian manufacturer of electrical enclosures for Industrial Automation and LV Energy Distribution, ETA is now recognized as a benchmark on the global marketplace. • Certified company with Headquarters in Italy • Two logistics centres in France and UK, one branch office in Cyprus for the Middle East area, and one representative office in St. Petersburg, Russia for three new Electricity Distribution solutions Power Centres with busbar...

 Open the catalogue to page 2

Express your power, ETA will protect it… Cover panels finished in standard textured RAL7035 colour, standard ETA painting cycle with epoxy polyester powder coating Structure made from high strength steel in order to ensure greater mechanical resistance Dedicated functional units for each device Cable entry from above or below for multiple installation types Galvanized structure with magnelis ® coating: eco-friendly with self-healing protection, in order to ensure aesthetic results of exceptional quality Simplified structural assembly thanks to the components’ high degree of standardization, flexibility...

 Open the catalogue to page 3

… with a complete system designed specifically for you • • • Certified busbar systems with In up to 4,000 A and Icw up to 100kA/1s Horizontal omnibus busbar system capable of being installed in upper, lower and intermediate positions Possibility of powering the devices from the right or left hand sides with a single busbar position, thus reducing installation times and raw material costs Moulded case circuit breakers functional unit Open switch functional unit with form of segregation 4b Forms of segregation 3b and 4b Accessories for fixing outgoing tangs’ extensions Insulating supports for busbars Power...

 Open the catalogue to page 4

A unique design for : Power Center, MCC and Secondary Energy Distribution panels Dual tab lock system for locking the functional units’ doors Easy to install thanks to the threaded holes and the use of M6 screws only Suitable for grounding connection Facilitated handling thanks to the possibility of positioning the base element on a pallet from all four sides Protection rating of IP30, capable of being increased to IP31 with a special kit (additional gasket and top cover), which can be easily mounted by the end user Three-way coupling for the structure’s assembly Natural ventilation guaranteed...

 Open the catalogue to page 5

When the combination creates performance: MCC with fixed drawers and removable inner plates Typical column offered in three combinations: Combination 1 Functional unit with forms of segregation 3a/3b Cover panels finished in standard textured RAL7035 colour, standard ETA painting cycle with epoxy polyester powder coating Available in a wide range of sizes, even for use in combination: W 600 700 900 1000 1200 Structure made from high strength steel in order to ensure greater mechanical resistance W = 900 mm (A = 600 + B = 300) W = 1000 mm (A = 600 + B = 400) (A = 700 + B = 300) W = 1200 mm (A =...

 Open the catalogue to page 6

The perfect solution for your requirements Busbar system from the back Busbar system from the roof Functional units Functional unit dedicated to input line Busbar system on the back and possibility of cable entry/exit from the top or from the bottom Busbar system on the roof with vertical distribution busbars accessible from the front, and possibility of cable entry/exit from the bottom Rated current In = 1600 A Rated short-time withstand current Icw 50kA/1s Cable entry module with provision for functional units Lower cable entry with pre-punched exit Housing ter

 Open the catalogue to page 7

Performance guaranteed by tested Short circuit resistance testing performed at the prestigious ABB Sace laboratory of Bergamo (Italy). Relative certification nr. 175 "Assemblies and Panels - Busbars systems in the ENERPOWER panel" issued by ACAE of Bergamo (Italy) based on the LOVAG reports issued by ABB Sace. Verification of Temperature-rise Limits carried out at the I.N.RI.M. laboratory of Turin (Italy) with test report nr. 14-0114-01. ENERPOWER system subjected to the test types required by the I EC Rated frequency Rated insulation voltage Ui Rated impulse withstand voltage Uimp Rated current Rated...

 Open the catalogue to page 8

E.T.A. S.P.A. Via Monte Barzaghino, 6 I-22035 Canzo, Como (Italy) t. +39 031 673611 f. +39 031 670525 infosede@eta.it www.eta.it E.T.A. ENCLOSURES (UK) LIMITED Unit 2, Ignite, Magna Way Rotherham, South Yorkshire, S60 1FD t. +44 01709 386630 f. +44 01709 369524 info@eta-enclosures.co.uk www.eta-enclosures.co.uk SASU E.T.A. France Rue du Pré aux Boeufs 76806 St Etienne du Rouvray t. +33 02 35643470 f. +33 02 35642275 eta-france@wanadoo.fr www.eta-france.fr E.T.A. S.P.A. Gagarinskaya st., 12 191187, Saint-Peterburg (Russia) ETA chooses sustainable paper. Fedrigoni, Symbol Freelife Gloss, Premium...

 Open the catalogue to page 9

All E.T.A. S.P.A. catalogues and technical brochures

  1. Company Profile

    19 Pages

    En
  2. Product Overview

    16 Pages

    En
  3. ABACUS EN

    2 Pages

    En
  4. E NEWS 2016 EN

    5 Pages

    En
  5. Innovations 2011

    2 Pages

    En