Catalogue 2008 - ESK Schultze Kältekomponenten - #9

/ 62


catalogue search
P. 01
P. 02
P. 03
P. 04
P. 05
P. 06
P. 07
P. 08
P. 09
P. 10
P. 11
P. 12
P. 13
P. 14
P. 15
P. 16
P. 17
P. 18
P. 19
P. 20
P. 21
P. 22
P. 23
P. 24
P. 25
P. 26
P. 27
P. 28
P. 29
P. 30
P. 31
P. 32
P. 33
P. 34
P. 35
P. 36
P. 37
P. 38
P. 39
P. 40
P. 41
P. 42
P. 43
P. 44
P. 45
P. 46
P. 47
P. 48
P. 49
P. 50


See other catalogues for ESK Schultze Kältekomponenten

Text version of the page
ESK
Schultze
Geräuschdämpfer Discharge Line Mufflers
QUALITY PRODUCTS • MADE IN GERMANY
GD-16 GDX-18 GDS-35 GDX-35 GDX-67 GD-80
Allgemeines
Beim Einsatz von Hubkolben- und Schraubenverdichtern entstehen Druckgaspulsationen, die sich in der Anlage als störendes Geräusch aus­wirken können. Zur Reduktion der Gaspulsation hat sich der Einbau von Geräuschdämpfern in die Druckleitung bewährt. Folgende Diagramme veranschaulichen die Verminderung der Pulsation, die sich positiv durch eine Reduzierung des Gesamtschalldruckes auswirkt.
General
By using reciprocating or screw compressors pressure pulsations will be introduced into the discharge line. These pulsations may cause annoying noise and vibration throughout the connected pipe work.To reduce these pressure pulsations it is recommended to fit a muffler into the discharge line.The results of fitting such a muffler are shown in the diagrams below.
Ohne ESK Geräuschdämpfer Without ESK Muffler
Mit ESK Geräuschdämpfer
With ESK Muffler
dB
dB
1000
2000
3000 Hz
2000
Anwendung
ESK-Geräuschdämpfer sind für den Betrieb mit HFKW-, HFCKW- und mit natürlichen Kältemitteln (auf Anfrage) einsetzbar. Geräuschdämpfer redu­zieren die Gaspulsation, aber keinen Körperschall.
Technische Spezifikation
Max.zulässiger Betriebsüberdruck [bar] 31 10
Zulässige Betriebstemperatur [°C] 140 ...-10 -10 ...—40
Application
ESK mufflers are suitable for use with HFC, HCFC refrigerants and natural refrigerants on request. Discharge line mufflers reduce gas pulsations but do not prevent the transmission of mechanical noise or vibration.
Technical Specification
Max. admissible working pressure [bar] 31 10
Admissible operating temperature [°C] 140 ...-10 -10 ...-40
Geräuschdämpfer, einstellbar
Die einstellbaren Geräuschdämpfer der Serie GDX eignen sich besonders für folgende Anwendungen:
• Verdichter Verbundanlagen (zentrale Druckleitung)
• Schraubenverdichteranlagen
• leistungsgeregelte Verdichter
• individuelle Rohrleitungsführung
• große Verdampfungs-Temperaturbereiche (Kältemittelmassenstrom/Druckverhältnis)
• installierte Anlagen mit Geräuschproblemen
Durch die Einstellbarkeit auf der Ein- und/oder Austrittsseite ist bei den genannten Bedingungen eine optimale Beeinflussung der Pulsations-dämpfung erreichbar.
Discharge Line Muffler, adjustable
The adjustable discharge line mufflers of the GDX range are especially suitable for the following application:
• Compressor parallel systems (central discharge line)
• Screw compressor systems
• Capacity controlled compressors
• Individual line arrangement
• Wide evaporating temperature ranges (ref. mass flow, pressure ratio)
• Fixed system with noise problems
In respect of the adjustement at the inlet- and/or outlet side, a high efficient influence of pulsation reduction is reachable.
LC Intelligent Level Control Sight Glasses R717-Recommendations Components for CO2 Accessories Spare Parts 7

pageCatalog pdf di En 2012-05-22-29