CPCIserial-CAN/402-2 CompactPCI® Serial (PCIe®) Board with 2 CAN Interfaces Comprehensive CAN Interface Card • 2x CAN interfaces according to ISO 11898-2 • Bus mastering and local data management • PICMG® CPCI-S.0 standard supporting high speed PCI Express® interface lines • Selectable CAN termination on board • Support of MSI (Message Signaled Interrupts) Wide Range of Operating System Support and Higher Layer Protocols • Drivers for Windows®, Linux®, VxWorks®, QNX®, RTX, RTX64 and On Time RTOS-32 • CANopen®, J1939 and ARINC 825 protocol libraries are available • Full compatibility with applications written for esd's NTCAN-API Modern Transceiver Technology • esd Advanced CAN Core (esdACC) technology offers highest CAN performance and diagnostic • CAN-FD ready 2 Mbit/s transceiver CPU’s RAM independent of the CPU or the system DMA controller. This results in a reduction of overall latency on servicing I/O transactions in particular at higher data rates and reduced host CPU load. The CPCIserial-CAN/402-2 provides high resolution hardware timestamps. Software Support CAN layer 2 (NTCAN-API) software drivers are available for Windows, Linux, VxWorks, QNX, RTX, RTX64 and On Time RTOS-32. Wide Choice of Hardware Designs The CPCIserial-CAN/402-2 is a CompactPCI The CANopen software package is available Serial board with two electrically isolated for Windows, Linux, VxWorks and QNX. high-speed CAN interfaces according to ISO 11898-2. Additional free-of-charge esd CAN tools for Windows are downloadable from our CAN Data Management website. The tools offer efficient setup and The independent CAN nets according to analysis of CAN applications and networks. ISO 11898-1 are driven by the esdACC (esd Advanced CAN Core) implemented in the Altera® FPGA. Controlled by the FPGA the CPCIserial-CAN/402-2 supports bus mastering as an initiator, meaning that it is capable of initiating write cycles to the host CAN Core with Timestamp with Timestamp with Timestamp Optional Electrical Isolation P1 CompactPCI Serial Connector PE with Timestamp Technical Specifications: CompactPCI Serial Interface: Interface PICMG CPCI-S.0 Rev. 1.0, PCI Express Rev. 1.0a, Link width 1x CAN: Interface 2x high-speed CAN interfaces according to ISO 11898-2, CAN-FD ready, bit rate up to 2 Mbit/s, with electrical isolation (1000V, 1s), Termination jumper on board (only 2x CAN Version) esdACC in EP4CGX Altera FPGA, acc. to ISO 11898-1 (CAN 2.0 A/B), CAN-FD ready General: Ambient Operation: 0 °C ... +75 °C / Storage: -40°C ... +85°C temp. Rel. humidity Max. 90 % (non-condensing) Power supply 2x CAN IMAX = 12V / 200 mA, Connector Back plane: P1 connector (Type A), Peripheral Slot CAN: DSUB9 (DSUB25 at 4x CAN Version) Weight Mechanics Software Support1 Additional CAN layer 2 object licenses including CD-ROM: CAN-DRV-LCD QNX C.1101.32 CAN-DRV-LCD VxWorks C.1101.55 CAN-DRV LCD RTX (incl. RTX64) C.1101.35 CAN-DRV LCD On-Time-RTOS-32 C.1101.45 Higher CAN layer protocols including CD-ROM: CANopen-LCD Windows/Linux, RTX, QNX or VxWorks C.1101.xx J1939 stack for Windows or Linux C.1130.xx ARINC 825-LCD for Windows/Linux, RTX, QNX or C.1140.xx VxWorks 1 For detailed information about driver availability for your operating system please contact our sales team. 4x LEDs, CAN status, module status EN 61000-6-2, EN 61000-6-4, EMC, RoHS, CE ©2015 esd electronic system design gmbh, Hannover All data are subject to change without prior notice. \\FILESERVER\pub\Texte\Doku\DBL\CPCI\Englisch\Blue\CPCIserial-CAN402_Datasheet_en_13.odt CPCIserial-CAN/402-2-2 2x CAN via 2x DSUB9, 4 HP I.3001.04 CAN layer 2 drivers for Windows and Linux are included in delivery. LEDs Conformity Order Information: Hardware CiA® and CANopen® are registered community trademarks of CAN in Automation e.V.. All trademarks are reserved by their respective owners. esd electronic system design gmbh Vahrenwalder Str. 207 30165 Hannover / Germany

CPCIserial-CAN/402-2 Driven by esdACC (Advanced CAN Core) Basic Product Features: • CAN ISO 11898-1 protocol compatibility • 11-bit and 29-bit CAN IDs • Bit rates from 10 kbit/s up to 1 Mbit/s supported • Receive buffer (64 CAN messages ) • Complete access to CAN error counters • Programmable error warning limit • Error code capture register • Error interrupt for each CAN bus error • Arbitration lost interrupt with detailed bit position • Single-shot transmission (no re-transmission) • Listen only mode (no acknowledge, no active error flags) • Automatic bit rate detection (hardware supported...