auxiliary MACHINERY FOR CONVEYOR BELTS
23Pages

auxiliary MACHINERY FOR CONVEYOR BELTS

INDEX Machinery for conveyor belts Manual slitter LCU215 Automatic slitter LCM210EEN Ply separator LST150 Semi-automatic cutting machine LTU100V7 LSM1200R Welder for longitudinal profiles and Runer with base Longitudinal welding machine LSM1200 Longitudinal welding machine LSM1000 LPBE600AC press LPBE1100 press LPBE1100A press LPBE1600A press Motorized welder “Turtle” LVM000 Thermoweldable extruded belt splicing kit LP9000 Handling equipment for conveyor belts

Manual slitter LCU215 -working width 2150 mmDesigned for the longitudinal cutting of conveyor belts. Maximum belt width: 2,150 mm Technical characteristics: Manual slitter easily handled both in the workshop and in situ. Operated through manual drive of belt. The side guides prevent lateral movement ensuring a perfect, straight cut of the belt with a constant width. 2 trapezoidal blade holders (with 20 spare blades)with firm positioning A metre counter that enables the cut length to be checked at all times. Total weight: 130 kg. Optional accesories: Housing frame (LCM 210R/2) Trapezoidal...

Longitudinal cutting automatic slitter LCM210EEN -working width 2150 mm- Designed for the longitudinal cutting of conveyor belts. Maximum belt width: 2,150 mm. Technical characteristics: Small sized machine for ease of positioning. It allows rolls with a maximum diameter of 1,500 mm and a weight of 2,500 kg to be cut, when their maximum width is 2,150 mm (for rolls with a width of up to 1,000 mm, the maximum bearable weight is 2,000 kg, centred on an expandable axis). The initial cutting speed varies between 0 and 8 m/min, slowly increasing in proportion to the diameter of the roll. However...

Technical characteristics: ■ Designed to separate the fabrics for splicing at the ends of ■ 2 pull rollers with protective fittings to prevent accidents while in use in both directions. ■ Highly accurate cut due to the new blade, made of quick-hardened ground steel. ■ Cutting speed: 6 m/min. ■ 0.5 c.v. ratio 1/40 reducer motor. ■ Adjustable regulated trawling pressure by means of a digital comparator. ■ Regulated adjustable blade position by means of a digital comparator. ■ Highly reliable, thanks to the digital comparators. ■ The pulling roller exerts pressure on the belt via a spring,...

separator. Accessories for LST150 Ply separator. Optional: As an optional accessory, we offer a special blade (LST 163) that not only separates the plies but also cuts the separated cover, i.e. the blade cuts lengthways and vertically. With this blade, the separated strip of belt is automatically cut in the same process. It is used for applications which require the removal of one of the two separated layers (cover or fabric), such as longitudinal splices.

esbelt Semiautomatic cutting machine LTU100V7 -working width 1370 mmDesigned to cut the ends of belts for splicing in the form of serrated fingers. Working width: 1.370 mm Technical Characteristics: Aluminium structure, 600 mm long. Hydraulically driven cutting system. Enables stepped cuts to be made in belts of 2 or 3 fabrics maximum. The open-sided structure allows belts of any width to be cut. Extremely reliable positioning of the fingers. Throughout the whole cutting process the belt and the blades remain securely in position. Fitted with a mechanism that holds the belt in place across...

The finger cutting machine is supplied with 2 cutting bases. These can be easily switched. Any type of cutting base may be optionally supplied, as long as the length of the finger is not greater than the swage block (Nylon pressure plate). Wooden cutting base with isosceles triangle-shaped fingers: base 12 mm and length 90 mm (pointed -non round- tips), suitable for 1 simple cut splices. Nylon swage block (pressure plate) included. Wooden cutting base with isosceles triangle-shaped fingers: base 20 mm and length 65 mm (pointed -non round- tips), suitable for two or more ply-belts. Nylon...

esbelt LSM1200R Welder for longitudinal profiles and Runer with base -working width 1200 mm- Machine for welding profiles and the Runer with base longitudinally to belts with a maximum width of 1,200 mm on both open and endless belts. Special characteristics: Machinery for the longitudinal welding of: - Open or endless profiles - Runer with base on open or endless belts, by means of hot air welders and pneumatic controls . It is simple and easy to handle, yet strong as well. It enables longitudinal profiles as well as Esbelts PVC Runer sidewalls with base to be welded to a variety of...

The hot air welders are easily regulated, as the profile can be attached using cold vulcanisation, thanks to the two positions for these welders. The belt centring guides enables the belt to be accurately The pulley pressure may also be regulated, thus limiting the slippage of the pneumatic cylinders. The belt advance speed is easily controlled using the potentiometer. This controls a 220V frequency converter with in turn controls the motor speed. 220 V feeder current single-phase. The machine comes supplied with the following as standard: ■ 2 hot air welders with digital heat control. ■ 2...

esbelt Longitudinal welding machine LSM1200 -working width 1200 mmMachine for welding 2 longitudinal profiles to belts with a maximum width of 1200 mm on both open and endless belts. Electrical control panel Profile unwinders Technical characteristics: Machine for welding profiles longitudinally to conveyor belts. 2 profiles may be welded simultaneously onto belts, guaranteeing a regular and effective weld from beginning to end. Enables profiles to be welded onto both open belts and spliced belts. The minimum endless belt length is 800 mm. Supplied with wheels fitted, to ensure the correct...

esbelt Longitudinal welding machine LSM1000 -working width 1000 mmMachine for welding 2 longitudinal profiles to belts with a maximum width of 1,000 mm on both open and endless belts. Electrical control panel Profile unwinders Technical characteristics: Machine for welding profiles longitudinally to conveyor belts. 2 profiles may be welded simultaneously onto belts, guaranteeing a regular and effective weld from beginning to end. Enables profiles to be welded onto both open belts and spliced belts. The minimum endless belt length is 800 mm. Supplied with wheels fitted, to ensure the correct...