Welding Consumables Handbook - 529 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

  9. P. 9

  10. P. 10

  11. P. 20

  12. P. 30

  13. P. 40

  14. P. 50

  15. P. 60

  16. P. 70

  17. P. 80

  18. P. 90

  19. P. 100

  20. P. 200

  21. P. 300

  22. P. 400

  23. P. 500

Catalogue excerpts

Untitled table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:6.00pt "Arial", sans-serif; } .font1 { font:15.00pt "Arial", sans-serif; } .font2 { font:25.00pt "Arial", sans-serif; } .font3 { font:38.00pt "Arial", sans-serif; } ESAB ' Welding Handbook Eighth dition Consumables for manual and automatic welding XA00003720

 Open the catalogue to page 1

Untitled table.main {} tr.row {} td.cell {} div.block {} div.paragraph {}

 Open the catalogue to page 2

Easy-to-weld rutile type electrode for welding in the flat position. The good flowing properties of the weld metal give a good finish to the weld beads on both butt and fillet welds. Good slag detachability. The stable arc, even at low welding currents, makes the electrode very suitable for sheet metal welding. SFA/AWS A5.1E6013EN 499E 42 0 RR 12 ISO 2560E 51 3 RR 31 > Yield stress, MPa460Tensile strength, MPa550 Elongation, %26 > Test temps, C Impact values, J +20 65 >47 >

 Open the catalogue to page 9

OK 46.00 is the best, all-round, rutile electrode and it is relatively insensitive to rust or other sur- face impurities. It deposits smooth weld beads in all positions, including vertical down, and the slag is easy to remove. OK 46.00 is very easy to strike and restrike, making it ideal for short welds, root runs and tacking. SFA/AWS A5.1E6013EN 499E 38 0 RC 11 ISO 2560E 43 3 R 11 CSN 05 5010E 46.17 > Yield stress, MPa400Tensile strength, MPa510 Elongation, %28 > Test temps, C Impact values, J 70 -20 35 >

 Open the catalogue to page 10

Untitled table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:7.00pt "Arial", sans-serif; } .font1 { font:9.00pt "Arial", sans-serif; } .font2 { font:17.00pt "Arial", sans-serif; } .font3 { font:25.20pt "Franklin Gothic Medium", sans-serif; } OK 48.00 Type Lime-basic SMAW E7018 Description A reliable, gnral purpose, LMA 驩lectrode for mild and low-alloy steels. OK 48.00 deposits a tough, crack-resistant weld metal. High welding speed in the vertical-up position. OK 48.00 is insensitive to the composition of the base mate-rial within fairly wide limits. The electrode can...

 Open the catalogue to page 11

Untitled table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:7.00pt "Arial", sans-serif; } .font1 { font:9.00pt "Arial", sans-serif; } .font2 { font:17.00pt "Arial", sans-serif; } .font3 { font:25.20pt "Franklin Gothic Medium", sans-serif; } OK 48.04 Type Lime-basic SMAW E7018 Description OK 48.04 is an AC/DC, gnral purpose, LMA 驩lectrode for welding mild and low-alloy steels. It has very good welding properties and deposits a high quality weld metal with very good mechani-cal properties. The electrode can be used for welding restrained structures where high welding...

 Open the catalogue to page 12

OK 48.05 is a general purpose, LMA electrode for welding mild and low-alloyed steels. It has very good running characheristics, especially on DC+. OK 48.05 welds very well even at very low currents, an advantage when welding thin-walled pipes. SFA/AWS A5.1E7018EN 499E 42 4 B 42 H5 ISO 2560E51 5B 120 20H NF A 81-309E 51 5/4 B 120 20 BH > Yield stress, MPa445Tensile strength, MPa540 Elongation, %29 > Test temps, C Impact values, J -20 140 -40 70 >

 Open the catalogue to page 13

Untitled table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:7.00pt "Arial", sans-serif; } .font1 { font:9.00pt "Arial", sans-serif; } .font2 { font:17.00pt "Arial", sans-serif; } .font3 { font:25.20pt "Franklin Gothic Medium", sans-serif; } OK 48.15 Type Lime-basic SMAW E7018 Description An LMA lectrode for welding mild and low-alloy steels. Exceptional welding properties in the ver-tical-up position. OK 48.15 gives the same good weld metal quality as OK 48.00, which makes the electrode suitable for welding structures in which high stresses cannot be avoided. It is...

 Open the catalogue to page 14

OK 50.40 is an all-round electrode for the positio-nal welding of mild steel, also well suited for pipe welding. It is particularly good for welding in the vertical-up position and for welding root runs. SFA/AWS A5.1E6013EN 499E 42 2 RB 12 CSN 05 5010E 50.95 > Yield stress, MPa>440Tensile strength, MPa520-620 Elongation, %27 > Test temps, C Impact values, J -20 >47 -30 >28 > Diameter, mmLength, mmWelding current, AArc voltage, VN. Kg weld metal/kg electrodesB. No. of elec-trodes/kg weld metalH. Kg weld metal/hour arc timeT. Burn-off time, s/electrode 2.5 350 50-100 23 0.80 88.0 0.8 513.235080-150240.5559.01.253...

 Open the catalogue to page 15

A low-hydrogen electrode with excellent running characteristics and very good mechanical pro- perties. Because of its double coating, it creates a deep crater which stabilises the arc and gives good protection against air in inclined positions. SFA/AWS A5.1E7016EN 499E 42 4 B 22 H10 ISO 2560E 51 5 B 24 (H) > Yield stress, MPa470Tensile strength, MPa540 Elongation, %28 > Test temps, C Impact values, J -20 150 -40 80 > Diameter, mmLength, mmWelding current, AArc voltage, VN. Kg weld metal/kg electrodesB. No. of elec-trodes/kg weld metalH. Kg weld metal/hour arc timeT. Burn-off time, s/electrode...

 Open the catalogue to page 16

OK 53.16 is a double-coated electrode combi-ning the running characteristics of a rutile elec- trode with the mechanical properties of a basic electrode. OK 53.16 welds on both AC and DC and the spatter loss is minimal. SFA/AWS A5.1E7016EN 499E38 2 B 32 H10 ISO 2560E 51 4 B 21(H) > Yield stress, MPa450Tensile strength, MPa530 Elongation, %28 > Test temps, C Impact values, J -20 120 > Diameter, mmLength, mmWelding current, AArc voltage, VN. Kg weld metal/kg electrodesB. No. of elec-trodes/kg weld metalH. Kg weld metal/hour arc timeT. Burn-off time, s/electrode 2.5 350 50-90 26 0.63 77 0.86 543.235090-150250.65461.457...

 Open the catalogue to page 17

OK 53.68 is an extra-high quality LMA electrode, particularly suitable for on-site welding. OK 53.68 yields a homogeneous, high-quality weld metal with an extra low content of impurities. The elec- trode operates well on AC as well as DC positive and negative. DC negative is preferred, as it pro- duces a small, easily controlled weld pool, mini- mising the risk of burn-through or undercutting. OK 53.68 is CTOD tested. SFA/AWS A5.1E7016-1EN 499E 42 5 B 12 H5 > AC, DC +(-) OCV 65 V Yield stress, MPa>420Tensile strength, MPa510-640 Elongation, %26 > Test temps, C Impact values, J -20 >150 -40 >80...

 Open the catalogue to page 18

All ESAB catalogues and technical brochures

  1. TAF 801 / 1251

    2 Pages

    En
  2. A-Series

    4 Pages

    En
  3. RT250 ? RT500

    2 Pages

    En
  4. Column & Boom

    2 Pages

    En
  5. AGW1 and AGW2

    2 Pages

    En
  6. BEVEL EXCAVATOR

    5 Pages

    En
  7. Oxy-fuel torches

    9 Pages

    En
  8. ESAB Plasma VBA

    3 Pages

    En
  9. VISION? T5

    5 Pages

    En
  10. ALPHAREX

    4 Pages

    En
  11. SUPRAREX TM HD

    9 Pages

    En
  12. COMBIREX? DX

    7 Pages

    En
  13. E-VENT?

    7 Pages

    En
  14. Miggytrac 1001

    2 Pages

    En
  15. A21 PRB and PRC

    2 Pages

    En
  16. DATA LEAP

    7 Pages

    En
  17. COLOMBUS III

    5 Pages

    En
  18. Wind Power

    1 Pages

    En
  19. Buddy Arc 145

    2 Pages

    En
  20. Buddy Tig 160

    2 Pages

    En
  21. PT26

    2 Pages

    En
  22. PowerCut 900

    2 Pages

    En
  23. PowerCut 700

    2 Pages

    En
  24. PowerCut 400

    2 Pages

    En
  25. PowerCut 1600

    2 Pages

    En
  26. Buddy? Arc 180

    2 Pages

    En
  27. KHM 351 YS

    2 Pages

    En
  28. TIGAID 315 AC/DC

    2 Pages

    En
  29. Kit F-15-691

    2 Pages

    En
  30. 20519 RP

    16 Pages

    En
  31. Chart ver-b

    1 Pages

    En
  32. 20Data.

    182 Pages

    En
  33. 20201

    46 Pages

    En
  34. 20450

    74 Pages

    En
  35. 20360

    46 Pages

    En
  36. CC-11

    44 Pages

    En
  37. SSP-10000

    36 Pages

    En
  38. SSP-1014

    4 Pages

    En
  39. SWR-10002

    2 Pages

    En
  40. SWR-10000

    14 Pages

    En
  41. COR-1049B

    22 Pages

    En
  42. COR-1055

    16 Pages

    En
  43. COR-1078

    21 Pages

    En
  44. COR-1076

    9 Pages

    En
  45. SWR-10001

    6 Pages

    En
  46. ALC-10001

    4 Pages

    En
  47. Remote controls

    2 Pages

    En
  48. Caddy™Arc251i

    2 Pages

    En
  49. TIGAID 315 AC/DC

    2 Pages

    En
  50. WeldPoint™

    2 Pages

    En
  51. QSet™

    1 Pages

    En
  52. PSF™ Centrovac

    2 Pages

    En
  53. PSF™

    2 Pages

    En
  54. MXL™ Torches

    2 Pages

    En
  55. Aristo™U8 / W8

    2 Pages

    En
  56. MMA

    2 Pages

    En
  57. TIG

    2 Pages

    En
  58. MIG/MAG compacts

    2 Pages

    En
  59. Suprarex SXE BIG

    9 Pages

    En
  60. ESP 150 Plasma

    6 Pages

    En
  61. Pulsed MIG Welding

    20 Pages

    En
  62. NewTech Helmets

    4 Pages

    En
  63. A2 Multitrac SAW

    2 Pages

    En
  64. wire feed unit

    2 Pages

    En
  65. Product Catalogue

    105 Pages

    En