Origo™ Tig 3000i AC/DC, TA24 AC/DC - ESAB - #1

Text version of the page

XA00129720 Applications Origo™ Tig 3000i AC/DC, TA24 AC/DC For demanding TIG welding applications Designed for high quality TIG-welding Origo™ Tig 3000i AC/DC welding power source provide excellent arc strike and consistent, stable arc in both DC and AC modes. Typical materials for AC welding include aluminium, aluminium alloys and magnesium alloys. With stainless steel, mild steel and copper alloys being typical for DC. AC welding with QWave™ One of the most important tasks of a TIG welding power source is to provide a stable arc. Origo™ Tig 3000i AC/DC with the QWave™ function, which optimises the AC wave form to give a smooth arc and at the same time the lowest possible noise without compromising the weld result. This machine also has True AC rating where set current is always equal to the true current. Easy to use Origo™TA24 AC/DC’s offer the necessary functions for TIG AC/DC and MMA AC/DC welding in an easy to understand MMC panel. AC Balance is the setting to control arc cleaning and penetration and AC Frequency setting is to control arc width. It also has a setting to control Electrode preheating with a possibility to have different shapes of the electrode and at the same time provide better starts with an extended life time of the electrode. • Repair and maintenance • Pipe and tube manufacturing • General fabrication and civil construction • Automotive • Process industry • Shipbuilding and offshore • Transport and mobile machinery • Designed for quality TIG-welding in all types of material. • QWave™- enables AC welding with high arc stability and low noise. • AC Frequency and Balance control - Optimises weld pool • Electrode preheating – excellent start and extended electrode life time • DC Pulsed TIG welding- easy control of heat input and the weld pool. • DC Micro Pulse – minimize heat effected zone especially on thin sheets • ESAB LogicPump – ELP, automatic start of the cooling unit by connection of a liquid-cooled torch • Energy save mode – fan and pump on demand • User-friendly TA24 AC/DC panel - All welding parameters presented in an easy to understand panel. • ESAB 2-program function -possibility to preprogram and change program during actual welding. Min/max current setting at TA24 AC/DC when using T1 Foot CAN • True MMA welding characteristics in AC and DC mode - Hot start, Arc force, and polarity switch (DC).