Text version of the page

Origo ™ MigC3000i/L3000i & Origo ™ Feed L3004

High performance MIG machines with QSet

™

functionfor stable short arc in no time

The professional user’s best option for general applications up to 300A Origo™MigC3000i and L3000i are professional user’s ideal system for general applications up to 300A. Exceptional value with excellent weld quality and ease of use.Origo™MigC3000i and L3000i are CC/CV machine for operating both MIG and MMA weldingThe power sources are based on inverter IGBT technology that provides reliable equipment with outstanding welding characteristics. Feeding system for all applications The power sources are optimised to operate together with the wire feed system Origo™Feed L3004 . The compact version has the feeder build in the power source. With separte version connection cables up to 15 m provides a wide working radius and together with all standard accessories as wheel kit, liftingeye it’s provide full flexibility. QSet™–Stable short arc in no time The TrueArcVoltage System The MA23A panel version has an unique setting of welding parameter in short arc.Simply set the wire feed speed and the QSet™will automatically select the correct welding parameters for the required wire/gas combination. QSet™does this for all valid gas and wire combinations, CO In combination with an ESAB PSF torch, guarantees that you weld with the correct arc voltage independent of any voltage drop in the welding cables. This means that you will get the same arc voltage and weld result either you have a set-up with short connection cable and 3m gun or a set-up with 15 meter working radius.
2 and MAG Brazing alike andwithout any need of synergic lines.QSet™is a new quick way to find optimised welding parameters for the best quality weld. Spatter is reduced to a minimum.It is simple and straightforward to set a new working point withQSet™. Only change wire feed speed to match the required welding power and then QSet™will select all other parameters for an optimised welding result in the whole short arc area.All this with only one knob control. Basic Mig settings Origo™MigC3000i and L3000i is equipped with an easy to set Man Machine Communication panel with the basic function for MIG welding. Together with the inverter technology is the ideal solution to always get the best welding result.

Applications

? Perfect for whenever a fully featured but compact machine is needed? •

Auto-repair ? Light metal fabrication ? Transport

Totally new design -compact and low weight?

? Education ? Household and furniture

Excellent user functionality from simplified panel layout ?

? Tack welding

Simply set the wire feed speed and the QSet™automaticallyselects the correct welding parameters for the required wire/gas combination XA00127220