Origo™ FeedAirmatic - ESAB - #1

Text version of the page

Sturdy and reliable Sturdy design with galvanised metal casing for use in tough environments. This electronic feeding unit is a part of ESAB well proven A9 pneumatic push-pull system. The feeding unit pushes the wire through the hose and the pneumatic welding gun PKB™ pull the wire by a compressed air operated turbine motor. The motor driven wire feed unit in Origo™ FeedAirmatic is mounted on the output shaft of the electric motor and comprises a driven feed roller and a freewheeling pressure roller. Pressure is exerted on the wire by means of an adjustable spring mechanism. Origo™ FeedAirmatic is fitted with a filter regulator. This drains automatically when the compressed air system is switched off. The pressure is permanently set at 5 bar. With safety in mind Designed to meet the most rigid safety standard IEC 60974-5 with low voltage (42 V/AC) operations and overload protection circuit to eliminate breakdowns. Flexibility The panel M10 is easy to operate with only a potentiometer for voltage adjustment (thyristor controlled power sources) and a switch for remote ON/OFF. The wire feed speed is adjusted pneumatically from the PKB™ push-pull gun. The complete push-pull system consisting the wire feeding unit Origo™ FeedAirmatic, the push-pull gun PKB™ 250 or PKB™ 400 and a hose package. The system ensures smooth, problem-free wire feeding especially of soft aluminium wire in the dimension from 0,8 to 1,6 mm. Extended working radius additional to the different hose packages can be obtained by adding connection cables of the lengths 5, 10 and 15 m between the power source and the wire feed unit. Complete hose packages are available in 3 different lengths: 5, 10 and 16 m. Origo™ FeedAirmatic is designed for the step controlled power sources Origo™ Mig 320/410/510 and the thyristor controlled power sources Origo™ Mig 400t/500t/630tw MAGMA. Easy service and maintenance The feeder mechanism is easy to access and all wear parts can easily be exchanged. One single pressure device makes it easy to adjust the appropriate feeding pressure. All electric components are protected in a separate compartment. XA00121020 • The push-pull system ensures smooth, problem-free wire feeding which is especially important when welding soft aluminium or other thin wires • Permits welding hose packages up to 16 m • Extended working radius with connection cables up to 31 m • Digital V/A meters (Option) • TrueArcVoltage System, measures the correct arc voltage value independent of the length of the interconnection cable, return cable or welding hose package • Extra versatility can be achieved by attaching a counterbalance device, wheel kit and a hanging bracket. • Enclosed Wire Spool keeps the wire clean Panel functions M 10 Voltage adjustment X On/off switch for remote control X Digital V/A meter, option (x) Origo™ FeedAirmatic M10 Feeder unit for pneumatically operated Push-Pull guns PKB™ 250 and 400 Extra versatility can be provided by utilising one of the following mounting options for the Origo™ Feed. Counterbalance & Mast, Wheel Kit or Hanging Bracket.