Origo™ Feed 302 M11 Origo™ Feed 304 and 484 M12 - ESAB - #1

Text version of the page

Sturdy and reliable Sturdy design with galvanised metal casing for use in tough environments. Electronically controlled feeding gives accurate and stable arc. The 4-wheel feed mechanism with grooves in both feed roll and pressure roll gives positive and stable feeding combined with low wear on the wire. The 2-wheel feeder mechanism is a cost efficient solution for wire dimension up to 1,2 mm. The feeders are available with Ø30 mm feed rollers for wires up to Ø1.2 mm (30-2), Ø1,6 mm (30-4) and Ø48 mm feed rollers for wires up to Ø2.4 mm (48-4). Operation: Wire feed speed, 2/4 stroke, creep start and burn-back timer setting and adjustments are made on the front panel of the feeder, giving a good overview of the settings. Voltage setting and adjustments on the power source. ESAB LogicPump ELP, automatically starts the water pump when a water cooled torch is connected. This prevents overheating of the welding torch. With safety in mind Designed to meet the most rigid safety standard IEC/EN 60974-5 with low voltage (42 V/AC) operations complete with an overload device ensuring the best possible protection. Flexibility Two different control panels the M11 and M12. The panels are easy to operate with accurate setting that suits different needs and demands. Extra versatility can be provided by utilising one of the following mounting options for the Origo™ Feed. Counterbalance & Mast, Wheel Kit or Hanging Bracket. Miggytrac and Railtrac connections to Origo™ Feed 304 and 484 through remote outlet. (Remote adjustment of welding voltage not applicable on step-controlled power sources). Easy service and maintenance The feeder mechanism is easy to access and all wear parts can easily be exchanged. One single pressure device makes it easy to adjust the appropriate feeding pressure. All electronic components are protected in a separate compartment. XA00114520 • 2/4 stroke, simplifies welding. • Adjustable burn-back timer gives correct stick-out. • Creep start, gradual feed of wire for ultimate starts. • Quick connectors- shortest possible set-up times. • ESAB LogicPump ELP, automatically starts the water pump when a water cooled welding torch is connected. Panel functions M 11 M12 2/4 stroke X X Adjustable burn-back time X X Creep start X X Inching/gas purge, option (x) (x) Origo™ Feed 302 M11 Origo™ Feed 304 and 484 M12 Feeder units for step controlled power sources Feeder mechanism M11 M12 302 1,9 – 20 m/min X 304 and 484 1,9 – 25 m/min X