Caddy™ Tig 2200i AC/DC - ESAB - #1

Text version of the page

Applications Caddy™ Tig 2200i AC/DC For the craftsmen and a wide range of repair and maintenance applications The Caddy™ is already a classic power source in the mobile welding equipment field. With the introduction of the Caddy™ Tig 2200i AC/DC series and a full range of accessories, you will find the optimal solution for a wide range of TIG welding applications. Designed for durability The machines are equipped with the large OKC 50 cable connectors for higher durability. The compact design, with its impact resistant polymer and aluminium casing, is light and easy to carry, yet the size does not compromise the important cooling of the internal components. Large heat sinks and clever design make for a cooler running machine with a longer life expectancy when used in harsh working environments. The design also helps to keep all sensitive parts inside the machine clean and dust free. Caddy™ is built in accordance with IP23, which means it can be used outdoors – even in the rain. The control panels are easy to understand and use. The durable design and the superior welding performance give you a machine that you can rely on day after day. Power factor correction - PFC Caddy™ Tig 2200i AC/DC is equipped with a PFC circuit making it possible to use the full range of the machine on a 16 A fuse. The PFC also protects the machine against fluctuating mains voltage and makes it safer to use with a generator. Easy to use Two alternative control panels are available. Both have all the necessary functions for TIG DC, AC/DC and MMA welding, all presented in an easy to understand layout. The control panel Caddy™ TA34 AC/DC is the panel with the advanced functionality, including PulseTIG. AC Balance is the setting to control arc cleaning and penetration and AC Frequency setting is to control arc width. It also has a setting to control Electrode preheating with a possibility to have different shapes of the electrode and at the same time provide better starts with an extended life time of the electrode. The control panel Caddy™ TA33 AC/DC is the easy way to weld AC and DC TIG. You only need to set the plate thickness, and the machine will control the rest, allowing you to produce a quality TIG weld. Designed for high quality TIG-welding In both DC and AC mode this TIG welding machine will give an excellent arc strike and consistent, stable arc. All types of material and thickness up to 5 mm can be welded with the highest quality. AC welding with QWave™ One of the most important tasks of an AC TIG machine is to provide a stable arc. The Caddy™ Tig 2200i AC/DC has the QWave™ function which optimises the AC wave form to give a smooth arc and at the same time the lowest possible noise without compromising the weld result. This machine also has True AC rating where the actual welding current is always equal to the set current. XA00132320 • Designed for quality TIG-welding in all types of material. • Easy to use - all welding parameters presented in an easy to understand layout. • QWave™- enables AC welding with high arc stability and low noise. • AC frequency and balance control (TA34 AC/DC) - optimises weld pool. • Electrode preheating – excellent start and extended electrode life time • ESAB 2-program function - possibility to pre-program and change program during actual welding. • DC Pulsed TIG welding - easy control of heat input and the weld pool. • DC Micro Pulse – minimize heat effected zone especially on thin sheets • True MMA welding characteristics in AC and DC mode - Hot start, Arc force, and polarity switch (DC). • Repair and maintenance • General light fabrication and civil construction • Process industry • Shipbuilding and offshore • Transport and mobile machinery