Text version of the page

Miggytrac1001

The perfect complement to your MIG power source

The Miggytrac1001 is a superb alternative if you wish to automate your GMAW process.The Miggytracis ideal for use with ESAB‘ssemi-automatic power sources and feed units.

The Miggytrac1001 is a small, compact, motor powered tractor to which a standard ESAB welding torch can be attached quickly. The four driving wheels, together with the permanent magnet which is fitted on the tractor, guarantee an even, stable movement. The magnet holds the tractor in the correct position on the work- piece, even if it is bent or angled and follows the joint using guide wheels, which can be adjusted to allow the unit to drive itself against the workpiece.The tractor functions as a straightforward remote control for the feed unit; you decide on the travel direction, then start and stop welding from the panel. The panel features additional functions such as travel speed settings (150-1200 mm/min), wire feed speed, voltage, voltage and welding on/off. The torch holder The torch holder is equipped with two manual slides for fine corrections of the torch position. The torch holder has also a rotating slide which gives maxi-mum opportunities to get the best possible torch angle. Cored-wire welding -a process in keeping with the times It is easy to mechanize a semi-automatic weld-ingmachine using the Miggytrac1001. The welding speed can be increased significantly, especially when cored wire is used. Simply connect the tractor to a suitable semi-automatic power source with a feed unit.Alternatively, an external source can be connected. The automatic welder performs the long and mono-tonousweld runs.
XA00126320