SILICON VIDEO® 9M001 - Epix - #1

Text version of the page

EPIX «ochrom* Camera1 Color Camë|§t a^Pixcr Exceptional Image Quality Small Size - Low Cost SILICON VIDEO® 9M001M and 9M001C CMOS camera Systems offer the advantages of high resolution progressive scan image capture, low noise digital signaling, small size, flexible interface cable, convenient software control, the availability of extensive processing, measurement, and analysis capabilities, and low cost. The SV9M001M is a 10-bit monochrome camera. The SV9M001C is a 10-bit Bayer Pattern color camera. XCAP software provides control of all camera operations. SENSORS BY APTINA - SILICON VIDEO® 9M001M/C cameras are based on the MT9M001 CMOS sensor from Aptina. This progressive scan sensor offers an electronic rolling shutter, continuous and single frame capture, windowing, column and row skip modes, snapshot mode, 10 bit dynamic range, and an active programmable array resolution of 1280 x 1024 pixels. ASYNCHRONOUS CAPTURE with STROBE OUTPUT - The SV9M001 cameras offer Asynchronous Capture: the recording of an image (or images) in response to a trigger signal. The cameras also provide a strobe output signal to synchronize an electronic flash (strobe), for bright, uniform, short duration illumination. The SV9M001 cameras can be triggered to capture an image (or images) as might be required in product inspection, laser beam profiling, medical imaging, or any application that requires image capture at a specific time (there is a delay of one frame time between trigger and start of frame capture). The optional use of strobe illumination allows minimum exposure time with maximum image sharpness. ONLY ONE CABLE - One cable connects the SILICON VIDEO 9M001M/C camera head to the PIXCI SI board. The PIXCI SI (Serial Interface) board provides power to the camera, sends and receives camera control signals, generates the programmable pixel clock, and receives video data. No dedicated power supply or power cable required. CAPTURE & ADJUST DIALOG - The XCAP Imaging Application provides a Capture & Adjust Dialog for selecting pixel clock frequency, integration/exposure time, capture resolution, gain, offset, trigger control, and more. The color camera dialog provides automatic white balance as well as manual adjustment of Red, Green, and Blue gain. The SILICON VIDEO 9M001M and 9M001C camera systems include the following items: • Camera Head (B&W or color) • Infrared Cut Filter (color camera) • Shielded Interface Cable (various lengths) • PIXCI SI PCI Image Capture Board • XCAP-Lite Imaging Program (XCAP-Ltd or Std Optional) To complete the system add 1/2" format C-Mount lens, analysis software, lighting, and computer - all available from EPIX, Inc., or from your authorized EPIX, Inc. distributor. 1280 x 1024 8-bit capture @ 43 fps Compact Camera Head PIXCI® SI Digital Frame Grabber 7 Foot Interface Cable (default) Infrared Cut Filter (9M001C) XCAP-Lite Imaging Program Camera Integration and Reset Control Sequence Save (XCAP-Ltd or Std) Triggered Sequence Capture 132 MB/s Burst Transfers PCI Bus: 32 or 64 bit, 3.3 or 5 volt Compatibility: Win VISTA, XP, 2K, NT, ME, 98, 95, 32-bit DOS & LINUX