SILICON VIDEO® 10C6, 10M6 - Epix - #1

Text version of the page

EPIX Monochrome Camera SV10M6 SILICON VIDEO 10C6 10 Megapixel Cameras PIXCI® SU Frame Grabber PCIe x1 I PIXCI® SI2 Frame Grabber PCIe x1 The SILICON VIDEO®10C6 color, or 10M6 monochrome camera, offers 10 megapixel progressive scan capture in an active programmable array resolution of 3840H x 2764V pixels. The camera offers windowing, column and row skip modes, snap-shot mode, and 12 bit dynamic range. The Electronic Rolling Shutter (ERS) provides maximum frame rates. See "Frame Rate Examples" for frame rates at different resolutions and pixel clock frequencies. Additional camera features include low noise digital signaling, small size, several interface cable options, the availability of extensive processing, measurement and analysis capabilities, and low cost. XCAP software provides convenient control of all camera operations. Asynchronous Capture with Strobe Output The SV10C6 and SV10M6 cameras offer asynchronous capture to acquire an image (or images) in response to a trigger signal. The cameras have a strobe output signal to synchronize an LED strobe. One RJ45 Cable and 4 Frame Grabbers A single RJ45 cable connects the camera head to a PIXCI® frame grabber. The cable carries power to the camera, carries camera control signals, carries the programmable pixel clock, and carries video. No separate power supply or power cable required. The SV10C6/M6 cameras are supported by 4 different PIXCI® SI series frame grabbers allowing use on either the PCI or PCIe bus. The PIXCI® SI supports one camera in a 32 bit PCI slot. The PIXCI® SI1 and SI2 frame grabbers support one or two cameras in a PCIe x1 slot. The PIXCI® SI4 supports 4 cameras on a PCIe x4 or wider slot. Camera Controls The XCAP-Lite sofware included with a PIXCI® frame grabber has a Capture & Adjust Dialog for selecting pixel clock fre-quency, integration/exposure time, capture resolution, trigger control, and more. The SV10C6 color camera dialog provides automatic white balance, manual adjustment of Red, Green, and Blue gain, and extensive color balance controls. Lens Optional Add a 1/2" format C-Mount lens, programmer libraries, image processing, or video to disk and image analysis software, or request a complete computer system. EPIX, Inc. assembles imaging systems, built to your specifications, with cameras, frame grabbers, high-performance motherboards, and RAID arrays for video to disk capture. « I If * ¥ PIXCI® SI4 Frame Grabber PCIe x4 SV10C6 / SV10M6 Camera (Lens Optional) PIXCI® SI Frame Grabber PCI Bus Optical Format: 1/2.3-inch Sensor Dimensions: 6.41mm(H) x 4.62mm(V) 7.90mm Diagonal Full Resolution: 3840H x 2764V Pixel Size: 1.67um x 1.67um Color Filter Array: Monochrome or Color RGB Bayer Pattern Shutter Type: Global Shutter Pixel Clock: 25 - 64 MHz Frame Rate: 7 fps at 64MHz (3840H x 2764V resolution) ADC Resolution: 12-bit Responsivity: 0.31 Volts/Lux-sec (550nm) Dynamic Range: 65.2dB Linear Supply Voltage: 5 to 12 Volts Power Consumption: < 638 mW at maximum data rate Operating Temperature: -40oC to +85oC Camera Dimensions: 2.50" L x 1.65" H x 0.81" D 63.50mm L x 41.75mm H x 20.60mm D Weight: 1.4 oz / 39 grams