catalogue search
P. 01
P. 02
|
|
You may also be interested in
Frame grabber, Camera, CMOS camera, Inspection system, Board camera
Text version of the page
| | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| PIXCI* SV5 Video Capture for the PCI Bus | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| FEATURES MUX — The multiplexer selects the video source, for the Programmable Gain, from either the S-Video input connector or from one of the two (composite video) BNC connectors. The multiplexer may be switched during vertical blanking. Programmable Gain — Compensates for reduced amplitude in the analog signal input. Gain can be programmed from 0% to more than 200%. Luminance A/D — Provides analog to digital conversion of NTSC, RS-170, CCIR, PAL, and the luminance (Y) component of S-Video sources. Chrominance (Color) A/D — Provides analog to digital conversion of the color (C) component of S-Video. | Decoder — Separates the Y/C components. Generates the U/V color difference signals. Digital Genlock — Automatic synchronization circuitry for precise digitization. Accommodates video sources which have variable timing, such as video tape recorders. Generates the pixel clock for transferring image data to the PCI bus interface. Scaling, Cropping — Interpolation is used to scale images to as small as 1/14 of their original size. Temporal Scaling — Image sequences may be captured at full or reduced frame rates. Trigger I/O — Four TTL inputs and four TTL outputs can be used for synchronization with external events. | | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | SPECIFICATIONS | | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| VIDEO INPUT: ■ Color or Monochrome Video Acquisition: NTSC, RS-170, NTSC S-Video: PAL, CCIR, PAL S-Video ■ Resolution-Pixels: 752x480: NTSC, RS-170, NTSC S-Video 920x580: CCIR 768x580: PAL, PAL S-Video ■ Resolution-Format: 8 bit Monochrome 24/32 bit RGB YUYV/UYVY/YUV[4:2:2:]/YcrCb ■ Capture Rate: 30 fps: NTSC, RS-170 NTSC S-Video, 25 fps: PAL, CCIR, PAL S-Video CONNECTIONS: ■ 4 Pin DIN Receptacle: S-Video Input ■ 2 BNC-Jacks: Composite Video Input ■ DB15 Receptacle: TTL I/O Triggers ■ Cables optionally available. BUS REQUIREMENTS: ■ 5 volt signalling PCI bus slot ■ 0.55 Amps @ +5 Volts ■ 4.913 in. by 3.350 in. DISPLAY: ■ Via PC's graphic display (S/VGA) card. PCI S/VGA supported - AGP S/VGA recommended. ■ Video display rate dependent on video format, graphic display card type, bit depth, resolution, processor speed, and motherboard bandwidth. DISPLAY - Windows: ■ Any Windows compatible graphic display. ■ 16 bit mode supported, 24/32 bit mode recommended. DirectDraw support recommended. ■ Special support for S/VGA cards w. hardware UYVY/VYUY overlays and chroma keying features, allowing low overhead video rate display w. graphic overlays. DISPLAY - LINUX: ■ Any Linux compatible graphic display. ■ TrueColor or DirectColor mode recommended. DISPLAY - DOS: ■ S/VGA card compatible with VESA 1.0 or later. ■ Monochrome display in 8 bit mode, 24/32 bit mode recommended. ■ Color display in 24/32 bit mode. CERTIFICATION AND TESTING: The PIXCI SV5 has been tested per EMC directive 89/336/EEC and is Certified to CE Class B emission standards (which is more restrictive than the FCC class B limit). | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| NTSC / RS-170 PAL / CCIR | MUX | PROGRAMMABLEL GAIN r | LUMINANCE A/D |
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||
| DIGITAL GENLOCK INTERPOLATE CLOCK GENERATION | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| S-VIDEO | CHROMINANCE A/D | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 4 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TRIGGER I/O | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 4 | 8 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| PCI BUS | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | AP Capture & Adjust Dialog | | IXCI SV5A OPTION | | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | The PIXCI SV5A offers 3 BNC connnectors instead of 2 BNC and 1 S-Video — all other features are identical to the PIXCI SV5. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| The XCAP imaging program features a Capture & Adjust Dialog dedicated to controlling the PIXCI SV5 imaging board. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Video To Disk Available: Capture image sequences, Video To Disk, using an EPIX imaging system (PIXCI SV5 board, camera, & computer). Color or monochrome, full video rate, for minutes or hours. Contact EPIX, or your authorized EPIX distributor, for a system customized to your specifications. Specifications subject to change without notice. EPIX, and PIXCI are registered trademarks of EPIX, Inc. XCAP, XCLIB, and XCLIBIPL are trademarks of EPIX, Inc. Other brand, product, and company names are registered trademarks of their respective owners. EPIX® imaging products are made in the USA. © 2003 EPIX, Inc. All Rights Reserved 10 June 2008 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ^EPIX | EPIX, Incorporated 381 Lexington Drive Buffalo Grove, IL 60089 USA Tel -847 465 1818 Fax-847 465 1919 epix@ epixinc. com | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||