Text version of the page

PIXCI EL1

® The PIXCI EL1 is a plug-n-play frame grabber requiring nohardware setup or adjustment. Install the board, load the software, connect the camera, and begin to capture images.Upon startup, the XCAP imaging program reads a cameraidentification chip on the PIXCI EL1 frame grabber, allowing XCAP to load the appropriate video format and display the camera’s dedicated Capture & Adjust Dialog.

PIXCI

®

EL1

The XCAP imaging program

Low Cost PCI Express x1 Frame Grabber for Camera Link Cameras

supports up to eight PIXCI EL1frame grabbers making it possible to use multiple Full, Medium, or Base configuration Camera Link cameras simulta- neously. The XCAP-Std program allows simultaneous use of the PIXCI EL1 with other EPIX Interfaces to almost any camera link camera. The PIXCI EL1frame grabber requires a x1 or wider PCI Express slot.Few high bandwidth cameras exceed the 204 MB/sec maximum throughput of the PIXCI EL1 board. Support for higher bandwidth cameras is available with the PIXCI E4 frame grabber, which transfers 700 MB/sec on a x4 PCI Express slot. The PIXCI EL1 offers: The PIXCI
® EL1 frame grabber supports Full, Medium, andBase configuration Camera Link cameras. Compatible with the PCI Express x1 (by one) bus, the EL1 frame grabber interfaces to more than 100 of the newest, most advanced, highest bandwidth machine vision cameras available. • Up to 204 Megabyte per second (sustained) data transfer to the host computer. ? Camera specific controls – exposure, bit depth, gain, frame rate, etc. ? Camera operation in free-run mode for maximum frame rate sequence capture. ? Camera operation in control (trigger) mode. ? Low price – only $895.00 with XCAP-Lite imaging program. Full, Medium & Base ConfigurationCamera Link Frame Grabber PCI Express x1 Bus Compatible 250 Megabyte/sec Burst Transfers Line Scan or Area Scan Camera Frame Rate Sequence Capture Triggered Image Sequence Capture 64-Bit Memory Addressing Camera Integration & Async Reset Control Integration From Microseconds to Minutes Images Stored in Motherboard Memory or RAID Array Compatible with Windows XP, 2000, Linux & 32-bit DOS RoHS Compliant
® frame grabbers supportingdifferent camera models, either Camera Link compatible or not. XCAP-Std also offers video-to-disk capture, subject to the performance of the host computer’s RAID array. Solutions and Support: EPIX, Inc. has been providing imagingsolutions and support for OEM machine vision manufacturers and engineers since 1984. EPIX, Inc. assembles complete imaging systems with cameras, frame grabbers, high-perfor- mance PCI Express buses, and with RAID arrays for video-to- disk capture. EPIX imaging systems, custom-built to your specfications, feature Intel motherboards and processors. Contact EPIX, Inc., or an authorized distributor of EPIX

EPIX, Incorporated

381 Lexington DriveBuffalo Grove, IL 60089 USA Tel - 847 465 1818 Fax - 847 465 1919 Web:
® imagingproducts, for help selecting cameras, frame grabbers, imaging software, optics, and computer systems. http://www .epixinc.com E-mail: sales@epixinc.com
Specifications subject to change without notice. EPIX and PIXCI are registered trademarks of EPIX, Inc. XCAP is a trademark of EPIX, Inc. EPIX ® imaging products are made in the USA. © 2007 EPIX, Inc. All Rights Reserved. 20 MAR 2007