Text version of the page

The PIXCI E4DB is a plug-n-play frame grabber requiring nohardware setup or adjustment. Load the software, install the board, connect the cameras, and begin to capture images. The XCAP imaging program supports up to 4 PIXCI E4DBframe grabbers allowing use of eight Base configuration Camera Link cameras in the same computer. The XCAP-Std program allows simultaneous use of the PIXCI E4DB with other EPIX The PIXCI E4DB and XCAP offers: ? 1 GB/sec burst data transfer rate. Up to 700 MB/sec sustained data transfer from cameras to x4 PCI Express bus. ? Two Camera Control Dialogs - independent or shared – exposure, bit depth, gain, frame rate, etc. ? Free-run mode for maximum frame rate sequence capture. ? Control mode for triggered image capture. ? Quantity one price $1595.00 with XCAP-Lite imaging program.

PIXCI® E4DB - 36220 PIXCI E4DB

®

Dual Base Camera Link Frame GrabberFor PCI Express

The PIXCI® E4DB frame grabber connects two Base cameralink cameras to the PCI Express bus. The PIXCI E4DB is handled by EPIX’ software as if two PIXCI E4 boards are installed. The E4DB will accept two trigger signals — one for each camera; or allows a single trigger to control capture from both cameras. A strobe output signal is generated for each trigger. The PIXCI E4DB frame grabber supports two cameras with a combined sustained bandwidth up to 700 MB/second. Compatible with the PCI Express x4 bus, the PIXCI E4DB frame grabber interfaces to more than 100 of the newest, most advanced, highest bandwidth machine vision cameras available. Supports One or Two Base ConfigurationCamera Link Cameras PCI Express x4 Bus Compatible 1 GB/sec Burst Data Transfers 700 MB/sec Sustained Data Transfer Line Scan or Area Scan Camera Frame Rate Sequence Capture Triggered Image Sequence Capture 64-Bit Memory Addressing Camera Integration & Async Reset Control Integration From Microseconds to Minutes Images Stored in Motherboard Memory or RAID Array Compatible with Windows XP, 2000, & Linux RoHS Compliant
® frame grabbers supporting different cameramodels, either Camera Link compatible or not. XCAP-Std also offers video-to-disk capture, subject to the performance of the host computer’s RAID array.Programmer’s libraries and image processing subroutines areavailable from EPIX for solving the most difficult particle tracking, machine vision measurement, inspection, image sequence analysis, and flow analysis tasks. Third party software is also available. Solutions and Support: EPIX, Inc. has been providing imagingsolutions and support for OEM machine vision manufacturers and engineers since 1984. EPIX, Inc. assembles complete imaging systems with cameras, frame grabbers, high- performance PCI Express buses, and with RAID arrays for video-to-disk capture. EPIX imaging systems, custom-built to your specifications, feature Intel motherboards and processors. Contact EPIX, Inc., or an authorized EPIX, Inc. distributor, for help selecting cameras, frame grabbers, imaging software, optics, and computer systems.

EPIX, Incorporated

381 Lexington DriveBuffalo Grove, IL 60089 USA Tel - 847 465 1818 Fax - 847 465 1919 Web: http://www .epixinc.com E-mail: sales@epixinc.com
Specifications subject to change without notice. EPIX and PIXCI are registered trademarks of EPIX, Inc. XCAP is a trademark of EPIX, Inc. EPIX ® imaging products are made in the USA. © 2007 EPIX, Inc. All Rights Reserved. 12 FEB 2007