PIXCI® E4 - Epix - (Version JPG) - Page n° 2 - PDF Catalogue | Technical Documentation

Untitled

PIXCI* E4

High Bandwidth Camera Link For the x4 PCI Express Bus

SUPPORTED HIGH BANDWIDTH CAMERAS

SPECIFICATIONS


Camera Resolution	Frame Rate	Bit Depth / Pixels	Notes
Basler 1280 A504k x Monochrome or Color 1024	500 fps	8-Bit CMOS 12 *[i²*1.25 Mpixel	Global Shutter. Windowing for faster frame rate.
NAC 512 HotShot 512 CL x Monochrome or Color 512	2300 fps	8-Bit CMOS 16i²0.25 Mpixel	ISO 1650 (Mono). Freeze-Frame Global Shutter.
NAC 1280 HotShot 1280 CL x Monochrome or Color 1024	500 fps	8-Bit CMOS 12 i²1.25 Mpixel	ISO 400 (Mono). Freeze-Frame Global Shutter.
Princeton Instruments 1600 Megaplus II ES2020 or ES2001 x Monochrome or Color 1200	31.85 fps	12-Bit CCD 7.4i²1.92 Mpixel	\ Simultaneous \ capture \ with display from up to camera
Princeton Instruments 1920 Megaplus II ES2093 x Monochrome or Color 1080	30.12 fps	12-Bit CCD 7.4 i²2.074 Mpixel
Princeton Instruments 2048 Megaplus II ES4020 x Monochrome or Color 2048	15.05 fps	12-Bit CCD 7.4 i² 4.19 Mpixel
Princeton Instruments 4008 Megaplus II ES11000 x Monochrome or Color 2672	4.63 fps	12-Bit CCD 9.0 i²10.71 Mpixel
Princeton Instruments 1536 Megaplus II ES1602 or S1603 x Monochrome 1024	6.2 fps	12-Bit CCD 9.0 i² 1.57 Mpixel	heads at full
Princeton Instruments 2184 Megaplus II ES3200 x Monochrome 1472	2.9 fps	12-Bit CCD 6.8 i²3.3 Mpixel	resolution, bit depth,
Princeton Instruments 4008 Megaplus II EC11000 x Monochrome or Color 2672	4.63 fps	12-Bit CCD 9.0 i² 10.71 Mpixel Peltier Cooled	and frame rate.
Virtually ALL ^Supports Full, Medium, & Base Camera Link Cameras ^MaximumResolution	Supports Camera's Maximum Frame Rate	Any	Optimzed for camera link cameras listed in PIXCI Selection Guide. 700 MB/sec Max Data Rate

PIXCI E4

SIGNAL INPUT & OUTPUT:

■ EIA RS-644 (LVDS) Drivers & Receivers support pixel clock frequencies up to 85 MHz.

PERFORMANCE:

Supports the camera's maximum:

■ Horizontal Resolution

■ Vertical Resolution

■ Frame Rate

■ Bit Depth

CONNECTIONS:

Two 26-pin 3M MDR Camera Link connectors for Full, Medium, and Base. 6-pin connector for Trigger, Frame Enable, and Strobe. Camera Link cables available.

DATA TRANSFERS:

Supports cameras with data output rates up to 700 MBytes/second. 64-bit memory addressing

BUS REQUIREMENTS:

x4 PCI Express Bus slot Operates in x16, x8, or x4 PCI Express Bus slot.

DIMENSIONS:

■ 13.6 cm long by 10.5 cm high (5.34" long x 4.13" high)

CERTIFICATIONS:

■ CE Compliant

■ ROHS Compliant

The chart lists high-performance cameras that showcase the PIXCI E4 board's capability to transfer massive amounts of image data - which translates into the ability to capture high resolutions at comparatively fast frame rates. The PIXCI E4 is primarily designed to support high performance cameras, but it also works with virtually ALL camera link cameras with a bandwidth requirement of 700 MB/second or less.

Please visit the PIXCI Selection Guide on the EPIX web site (www.epixinc.com) for a comprehensive listing of supported cameras.

Contact EPIX, Inc., or your authorized EPIX, Inc. distributor, if your camera isn't already listed.

Specifications subject to change without notice. EPIX and PIXCI are registered trademarks of EPIX, Inc. XCAP, XCLIB, and XCLIBIPL are trademarks of EPIX, Inc. Other brand, product, and company names are registered trademarks of their respective owners. EPIX ® imaging products are made in the USA. © 2008 EPIX, Inc. All Rights Reserved. 13 June 2008

EPIX SOFTWARE Support

Supported by XCAP-Lite (no charge with

board purchase), XCAP-Ltd, XCAP-Std,

XCLIB, and XCLIBIPL.

Compatible with WIN XP (32 & 64 bit), 2000,

Linux (32 & 64 bit) and 32-bit DOS.

Also TWAIN and Image-Pro compatible.

^EPIX_@

EPIX, Incorporated 381 Lexington Drive Buffalo Grove, IL 60089 USA Tel -847 465 1818 Fax-847 465 1919

EPIX

e-mail: ^ EPIX

PIXCI® E4 - Epix - #2

CMOS camera, High speed camera, Digital camera, Camera, Board camera