Text version of the page

SOLUTIONS and SUPPORT Medium and Full Configuration Camera Link cameras EPIX, Inc. has been providing imaging solutions and support for OEM machine vision manufacturers and engineers since 1984. Contact EPIX, or ALRAD INSTUMENTS LTD, for help selecting cameras, frame grabbers, imaging software, optics, lighting, and computer systems.

PIXCI® CL2 - 36220 PIXCI CL2

® usuallyrequire more PCI bus bandwidth than provided by a 32-bit/33MHz PCI bus. The PIXCI CL2 frame grabber requires a 64-bit/66MHz PCI bus slot, or a PCI-X bus slot. These buses are available on server or workstation computers, which EPIX can assemble to your custom specifications. The XCAP imaging program

PIXCI

supports up to 8 PIXCI CL2 boards(on the same or multiple buses) making it possible to use multiple Full, Medium, or Base configuration Camera Link cameras simultaneously. The XCAP-STD program allows simultaneous use of the PIXCI CL2 with other EPIX frame grabbers supporting different camera models, either camera link compatible or not, allowing one computer to support simulta- neous use of different cameras under the control of one imaging program.
®

CL264-Bit/66MHz PCI Interface Board forFull, Medium & Base Configuration Camera Link Cameras

The PIXCI CL2 is a plug-n-play frame grabber board requiring nohardware setup or adjustment. Install the board, load the software, connect to the camera, and begin to capture images. When the XCAP imaging program is started, it automatically reads a camera identification code programmed on the PIXCI CL2 board. This code specifies the camera being used and allows XCAP to immediately load the appropriate video format and display the camera’s dedicated Capture & Adjust Dialog (camera control menu). The PIXCI CL2 offers The PIXCI
® CL2 frame grabber supports Full, Medium, and Baseconfiguration Camera Link cameras. Compatible with the 64-bit/ 66MHz PCI bus, the CL2 board interfaces to many of the newest, most advanced, highest bandwidth machine vision cameras available. ? Up to 400 megabytes per second data transfer to the host computer. ? Camera specific control – exposure, bit depth, gain, frame rate. ? Camera operation in free-run mode – supporting maximum frame rate sequence capture. ? Camera operation in control (trigger) mode. Full, Medium & Base ConfigurationCamera Link PCI Bus InterfaceLine Scan or Area Scan Camera Frame Rate Sequence CaptureTriggered Image Sequence Capture64-bit PCI Bus Master Camera Integration and Async Reset Control Integration From Seconds to Minutes Images Stored in Motherboard Memory 528 MB/s Burst Transfers PCI Bus: 64-bit/66MHz or PCI-XCompatible with Windows XP, 2000, NT,ME, 98, 95, & Linux RoHS Compliant Boards Available

EPIX, Incorporated

381 Lexington DriveBuffalo Grove, IL 60089 USA Tel - 847 465 1818Fax - 847 465 1919Web: http://www .epixinc.com E-mail: epix@epixinc.com
Specifications subject to change without notice. EPIX, PIXCI, and SILICON VIDEO are registered trademarks of EPIX, Inc. XCAP, XCLIB, and XCLIBIPL are trademarks of EPIX, Inc. Other brand, product, and company names are registered trademarks of their respective owners. EPIX ® imaging products are made in the USA. © 2007 EPIX, Inc. All Rights Reserved, 14 Mar 2007