catalogue search
P. 01
P. 02
|
|
You may also be interested in
High speed camera, Inspection system, Frame grabber, PCI, CMOS camera
Text version of the page
| | |||||||
| PIXCI® CL1 For Camera Link Digital Cameras | |||||||
| | |||||||
| WARE | | ||||||
| SPECIFICATIONS | | ||||||
| | |||||||
| CAPTURE All cameras supported by PIXCI CL1 imaging boards allow software control of exposure, gain, shutter speed, line rate, and more. The XCAP imaging program provides a dedicated Capture & Adjust Dialog for convenient control. A Capture & Adjust Dialog is automatically displayed when the PIXCI CL1 board is "Opened" from the Lite, Ltd, Std, or Plus versions of the XCAP | &ADJUST program. XCAP knows which Dialog to load by reading the camera identificiation code from the PIXCI CL1 board. The Adjust Dialog uses camera control names designated by the camera manufacturer. As a result, the camera's user manual provides all the information required to control the camera from | SIGNAL INPUT & OUTPUT: ■ EIA RS-644 Drivers & Receivers are used as the interface circuits. RESOLUTION: ■ Pixels: 8 to 4,096 pixels per line Pixel offset from horizontal drive: 0 to 8 pixels less than the number of pixel clocks per line from the camera. ■ Lines: 1 to 65,534 lines per image. Line offset from vertical drive: 0 to 1 less than the maximum number of lines from the camera. MAXIMUM FRAME RATE: ■ Camera Dependent CONNECTIONS: ■ 9 pin D-Subminiature for Trigger, Frame Enable, and Strobe. ■ 26 pin 3M MDR connector for Camera Link. ■ Camera Link cables optionally available. TRANSFER RATES: ■ Requires a burst mode PCI motherboard capable of sustained transfer rates to motherboard DRAM equal to or greater than the peak byte transfer rate of the camera. A motherboard with AGP display is suggested. BUS REQUIREMENTS: DIMENSIONS: 12.48 cm long by 9.4 cm high (4.913" long x 3.7" high) [short slot] CE / FCC CERTIFICATION: PIXCI CL1 was tested per EMC directive 89/336/EEC and performed to class B. | |||||
| | |||||||
| EPIX SOFTWARE Support | J | ||||||
| | |||||||
| Addendum: Please visit the EPIX web site: www.epixinc.com, for an up-to-date listing of the cameras EPIX supports. The most-recently added cameras appear near the bottom of the home page. The PIXCI Selection Guide, reached be clicking a button in the upper-left corner of the home page, provides a listing of all other cameras supported by PIXCI imaging boards. Look in column 5 "Supported By" for "PIXCI CL1". EPIX offers more than 250 PIXCI CL1 boards supporting base configuration camera link cameras. | Supported by XCAP-Lite (no charge with camera purchase), XCAP-Ltd, XCAP-Std, XCLIB, and XCLIBIPL. Compatible with WIN XP, 2K, NT, ME, 98, & 95. XCLIB developer library is available for LINUX. ^EPIX@ | ||||||
| | |||||||
| Specifications subject to change without notice. EPIX and PIXCI are registered trademarks of EPIX, Inc. XCAP, XCLIB, and XCLIBIPL are trademarks of EPIX, Inc. Other brand, product, and company names are registered trademarks of their respective owners. EPIX ® imaging products are made in the USA. © 2007 EPIX, Inc. All Rights Reserved. 20 MAR 2007 | EPIX, Incorporated 381 Lexington Drive Buffalo Grove, IL 60089 USA Tel -847 465 1818 Fax-847 465 1919 | ||||||
| e-mail: ^EPIX@ | |||||||
| | |||||||