| | | 12. The module identification !. The identification number of the FIS2001 can be set for the purpose of multi-point monitoring systems. The number is released through serial output (0 to 7). 2. The number can be Identified with three patterns prepared on the substrate as below. 3. The factory setting is "0". | | |
| | | 13. Serial output 1. The RS232C data is released every second from Pin2 (SO). 2. The protocol is 9600bps (Baud rate), 8bits (Data bits), none parity (Parity bit), stop bits 1 (Stop bits), None (RTS-/CTS protocol). None (XON-/XOFF protocol), CP. LF (CR signal), 0-5vdc, ASCII, and active Hi. 3. The data have the following specifications and transmits the ASCII character of 12 digits each for CO, and CH4 (a total of 24 digits) for every second. | | |
| | | Digit 1 : Numeric from "0" to "7" identifying the independent Smart Sensor Digit 2: Space Digit 3: Character "C Digit 4: Character "O" Digit 5: Space Digits 6 to 9: Numeric "0000", "0030" to "0390", or character "OVER". Digit 10: Space | | |