Closedgauging
- Ullage- Temperature
- Oil-Water interface level
- Innage, Reference height (electronic)
HERMetic UTI 2000 Touch
The HERMetic UTI 2000 Touch is a portable gas tight liquid
level gauge designed to operate on top of closed petroleum and chemical
industrial tanks. The unit is used for custody transfer and inventory control measurements on land tanks and FPSO. High accuracy is achieved by using an etched uncoated stainless steel tape. Digital technology assures no drift of the
temperature calibration (Quartz precision). Connected to a HERMetic vapour lock valve ï¬ xed on the tank, the HERMetic UTI 2000 Touch avoids any gas release during operation. The UTI 2000 Touch can be connected to a specially designed valve for industrial application, the HERMetic Valve LC2.The unit enables 4 measurements in one single operation: High precision stainless steel tape Sensing head Touch This sensing head is equipped with 4 electronic sensors, one for the
detection of the liquid level, one for the oil / water interface detection, one for the dipping plate detection and one for the
temperature measurement. Technical speciï¬ cations: Accuracy of ullage interface detection: ± 1 mm (0.04” approx.)
Detection of dip datum plate: Electronic
Maximum tank overpressure: 0.2 bar
Tape length: 30 m / 100 ft
Tape resolution: 1 mm, 1/16”
Tape accuracy: ± 1.5 mm / 30 m (±1/16” / 100 ft approx.)
Meets ISO 4512 and API MPMS Chap 3.1A requirements
Minimum detectable tank bottom liquid level: 6 mm (1/4” approx.)
Temperature sensor measurement range: -40°C to 85°C
Temperature accuracy over calibration range: ± 0.1°C (-25°C to 75°C)
Meets ISO 4268 and IP PMM Part IV, API MPMS Chap 7 requirements
Statistics on temperature: Average/standard deviation
indicator of temperature or stability
Temperature recording: Up to 15 individual values
Typical weight: 5 kg / 11 Lbs.
10