Text version of the page 
Text version of the page 
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | STH Series | | | | | | STH | | | | | | | | | | | | | | Technical Data | | | | | | STH .25M — STH 1.5M x 2 Series Custom Orificed Products | | | | | | | | | | 0D | | | | | | | | | | | | | | C | | | | | | | | | | F | | | | | | | | | | A | | | | | | | | | | 0D | | | | | | | | | | | | | | | | | | | | Al | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Catalog No./ Model | \-1 Stroke (mm) | Max. in.-lbs./cycle (Nm/c) | Max. Reaction in.-lbs./hour Force lbs. (Nm/hr) (N) | Extended lbs. (N) | Compressed lbs. (N) | Weight lbs. (g) | | | | ¿STH .25M | 0.25 (6,0) | 100 (11) | 39,000 (4 420) | 615 (2 730) | 2.5 (11) | 4.0 (18) | 2.8 oz. (79) | | | | ¿STH .5M | 0.50 (12,5) | 585 (65) | 390,000 (44 200) | 1,800 (8 000) | 4.0 (18) | 7.0 (31) | 7.7 oz (218) | | | | ¿STH .75M | 0.75 (19,0) | 2,180 (245) | 780,000 (88 400) | 4,400 (1 9 600) | 8.0 (35) | 20.0 (90) | 1.1 (500) | | | | ¿STH 1.0M | 1.00 (25,0) | 4,400 (500) | 1,300,000 (147 000) | 6,700 (29 800) | 22.0 (98) | 53.0 (235) | 1.6 (726) | | | | ¿STH 1.0M x 2 | 2.00 (50,0) | 8,800 (1 000) | 2,100,000 (235 000) | 6,700 (29 800) | 15.0 (66) | 30.0 (133) | 1.9 (862) | | | | ¿STH 1.5M x 1 | 1.00 (25,0) | 10,200 (1 150) | 2,200,000 (250 000) | 14,600 (65 000) | 20.0 (90) | 51.0 (227) | 3.1 (1 400) | | | | ¿STH 1.5M x 2 | 2.00 (50,0) | 20,400 (2300) | 3,200,000 (360 000) | 14,600 (65 000) | 12.5 (56) | 51.0 (227) | 4.0 (1 800) | | | | | | | | | | | | | | | | | | | | | | | Notes: 1. Custom orificed application data needed. 2. All shock absorbers will function at 5% of their rated energy per cycle. If less than 5°%, a smaller model should be specified. 3. Enidine recommends a positive stop to prevent bottoming of the shock absorber. 4. A= Non-standard lead time items, contact Enidine. | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | (mm) | (mm) | (mm) | (mm) | (mm) | (mm) | (mm) | | | | ¿ STH .25M | — | 2.81 (71,0) | M14 X 1.0 M14 x 1,0 | .19 (4,8) | .50 (12,7) | 2.00 (51,0) | .50 (13,0) | | | | ¿ STH .5M | - | 3.50 (89,0) | M22 X 1.5 M22 x 1,5 | .22 (5,6) | .38 (9,5) | 2.70 (68,5) | .88 (20,0) | | | | ¿ STH .75M | — | 5.13 (130,0) | M30 X 2.0 M30 x 2,0 | .31 (8,0) | .56 (14,3) | 4.06 (103,0) | 1.13 (27,0) | | | | ¿ STH 1.0M | - | 6.70 (170,0) | M36 X 1.5 M36 x 1,5 | .38 (9,5) | .69 (17,5) | 5.38 (136,5) | 1.25 (32,0) | | | | ¿STH 1.0M x 2 | - | 9.38 (238,2) | M36 X 1.5 M36 x 1,5 | .38 (9,5) | .69 (17,5) | 7.02 (178,3) | 1.25 (32,0) | | | | ¿STH 1.5M x 1 | 7.09 (180,0) | - | M45 X 1.5 M45 x 1,5 | .63 (16,0) | - | 6.06 (154,0) | 1.63 (42,0) | | | | ¿STH 1.5M x 2 | 10.63 (270,0) | - | M45 X 1.5 M45 x 1,5 | .63 (16,0) | - | 8.62 (219,0) | 1.63 (42,0) | | | | | | | | | | | | | | | | | | | | | | | Note: A= Non-standard lead time items, contact Enidine. | | | | | | | | | | www.enidine.com | | Email: industrialsales@enidine.com | | Tel.: 1-800-852-8508 ext. 111 | | | | | | Fax: 1-716-662-0406 | | 40 | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
|