| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | OEM Adjustable Series Hydraulic Dashpots J2 OEM Series | | |
| | | |
| | | Adjustment Techniques Example: OEM 1.25 x 1 1. Impact Velocity: 40 in./sec. 2. Intersection Point: Adjustment Setting 5 3. Useable Adjustment: Setting Range 0 to 5 Example: (LR)OEMXT iVi x 2 1. Impact Velocity: 20 in./sec. 2. Intersection Point: Adjustment Setting 3 3. Useable Adjustment: Setting Range 0 to 3 Position 0 provides minimum damping force. Position 8 provides maximum damping force. | | |
| | | After properly sizing the shock absorber, the useable range of adjustment settings for the application can be determined: 1. Locate the intersection point of the application's impact velocity and the selected model graph line. 2. The intersection is the maximum adjustment setting to be used. Adjustments exceeding this maximum suggested setting could overload the shock absorber. 3. The useable adjustment setting range is from the 0 setting to the maximum adjustment setting as determined in step 2. | | |
| | | |
| | | Useable Adjustment Setting Range | | |
| | | |
| | | |
| | | s> о ш О | | |
| | | |
| | | 360° adjustment with setscrew locking. OEMXT 3/4 and OEMXT 11/8 OEMXT 1.5M and OEMXT 2.0M | | |
| | | 180° adjustment with setscrew locking. OEMXT 3.0M - OEM 4.0M | | |
| | | |
| | | |
| | | 360° adjustment with setscrew locking (LR)OEMXT 3/4 and (LR)OEMXT 11/8 (LR)OEMXT 1.5M and (LR)OEMXT 2.0M | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - DEM .35 | \ | | EM .5 | | | | | | | | | | | | | | \. | | \ | | | | | | | | | | | | | | V | | | | OEM 0 | 1M.15« _ | Л.25,1 | 3,116/1 I_ | 25^ | | | | | | | | | | | | | | | | | | |
| | | È 120 I SI 80 I 1 40 | | |
| | | |
| | | |
| | | 1 2 3 4 5 6 7 ADJUSTMENT SETTING (For Impact Velocities below 12 In/sec, consult factory) | | |
| | | 360° adjustment with setscrew locking OEM 1.0 | | |
| | | 180° adjustment with setscrew locking OEM 0.1M - OEM .5 | | |
| | | |
| | | |
| | | |
| | | 2 Zj <D — СО ¡1 о" | | |
| | | |
| | | 180° adjustment with setscrew locking (LR)OEM 0.15M - (LR)OEM .5 | | |
| | | 360° adjustment with setscrew locking (LR)OEM 1.0 | | |
| | | |
| | | |
| | | www.enidine.com Email: industrialsales@enidine.com | | Tel.: 1-800-852-8508 ext. 111 | | |
| | | 19 | | | Fax: 1-716-662-0406 | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |