Text version of the page 
Text version of the page 
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | OEM Small Bore Series | | | | | | | | | | :hnical D | | | | | | OEM 0.1M — (LR)OEM 1.0 Series Standard | | | | | | 0d | | | | | | | | | | | | | | �73861175217143152 | | | | | | | | | | | | | 0d | | | | | | | | | | wf ■■ Adjustment | | | | | | | | | | *Note: A| and E| apply to button models. | | | | | | | | | | | | | | | | | | | | | | | | | Catalog No./Model | (S) | Optimal Velocity | (ET ) Max. in.-lbs./cycle (Nm/c) | (ETC) Max. in.-lbs./hour (Nm/hr) | (Fp) Max. | | (Fd) Max. | Model Weight | | | | Stroke in. (mm) | Range in./sec. (m/s) | Reaction Force lbs. (N) | Extended lbs. (N) | Compressed lbs. (N) | Propelling Force lbs. (N) | (mass) (g) | | | | OEM .1M (B) | 0.28 | 12-130 | 50 | 110,000 | 275 | 0.5 | 1.0 | 80 | 1.0 | | | | | (7,0) | (0,3-3,30) | (6,0) | (|2 400) | (| 220) | (2,2) | (4,5) | (350) | (28) | | | | OEM .15M (B) | 0.38 | 12-130 | 50 | |68,000 | 200 | 0.8 | 1.7 | 80 | 2.0 | | | | | (10,0) | (0,3-3,30) | (6,0) | (19 000) | (890) | (3,5) | (7,5) | (350) | (56) | | | | OEM .25 (B) | 0.38 | 12-130 | 50 | |78,000 | 200 | 0.8 | 1.7 | 80 | 2.0 | | | | OEM .25M (B) | (10,0) | (0,3-3,30) | (6,0) | (20 000) | (890) | (3,5) | (7,5) | (350) | (56) | | | | LROEM .25 (B) | 0.38 | 3-50 | 50 | |78,000 | 200 | 0.8 | 1.7 | 100 | 2.0 | | | | LROEM .25M (B) | (|0,0) | (0,08-|,30) | (6,0) | (20 000) | (890) | (3,5) | (7,5) | (440) | (56) | | | | OEM .35 (B) | 0.47 | 12-130 | 150 | 300,000 | 450 | 1.0 | 2.2 | 120 | 3.0 | | | | OEM .35M (B) | (12,0) | (0,3-3,30) | (17,0) | (34 000) | (2000) | (4,5) | (9,8) | (530) | (85) | | | | LROEM .35 (B) | 0.47 | 3-50 | 150 | 300,000 | 450 | 1.0 | 2.2 | 200 | 3.0 | | | | LROEM .35M (B) | (|2,0) | (0,08-|,30) | (|7,0) | (34 000) | (2 000) | (4,5) | (9,8) | (890) | (85) | | | | OEM .5 (B) | 0.50 | 12-180 | 250 | 284,000 | 775 | 1.3 | 2.8 | 150 | 5.0 | | | | OEM .5M (B) | (|2,7) | (0,3-4,50) | (28,0) | (32 000) | (3 500) | (5,8) | (|2,4) | (670) | (I4I) | | | | LROEM .5 (B) | 0.50 | 3-50 | 250 | 284,000 | 775 | 2.0 | 3.8 | 250 | 5.0 | | | | LROEM .5M (B) | (|2,7) | (0,08-|,30) | (28,0) | (32 000) | (3 500) | (8,9) | (|7,0) | (1 120) | (I4I) | | | | OEM 1.0 (B) | 1.00 | 12-130 | 650 | 622,000 | |,000 | 3.0 | 6.0 | 300 | 10.0 | | | | OEM 1.0M (B) | (25,0) | (0,3-3,30) | (74,0) | (70 000) | (4 400) | (|3,0) | (27,0) | (| 330) | (285) | | | | OEM 1.0MF (B) | (25,0) | (0,3-3,30) | (74,0) | (70 000) | (4 400) | (|3,0) | (27,0) | (| 330) | (285) | | | | LROEM 1.0 (B) | 1.00 | 3-50 | 650 | 622,000 | |,000 | 3.0 | 6.0 | 450 | 10.0 | | | | LROEM 1.0M (B) | (25,0) | (0,08-|,30) | (74,0) | (70 000) | (4 400) | (|3,0) | (27,0) | (2 0|6) | (285) | | | | LROEM 1.0MF (B) | (25,0) | (0,08-|,30) | (74,0) | (70 000) | (4 400) | (|3,0) | (27,0) | (2 0|6) | (285) | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | (mm) | (mm) | (mm) | (mm) | (minm.) | | | | OEM 0.1M (B) | 2.25 (57,0) | 2.63 (67,0) | MI0 x 1,0 | .12 (3,0) | 0.34 (8,6) | 1.95 (49,4) | .34 (8,6) | .40 (|0,2) | - | - | - | | | | OEM .15M (B) | 3.22 | 3.61 | MI2 x 1,0 | .13 | 0.34 | 2.81 | .43 | .56 | - | .43 | .38 | | | | | (8|,8) | (9|,7) | (3,3) | (8,6) | (7|,4) | (|0,9) | (|4,2) | - | (ll,0) | (9,7) | | | | (LR)OEM .25 (B) | 3.22 | 3.59 | |/2-20 UNF | .13 | 0.44 | 2.8|) | .43 | .56 | - | .44 | .50 | | | | (LR)OEM .25M (B) | (81,8) | (91,2) | (MI4 x 1,5) | (3,3) | (ll,2) | (71,4 | (10,9) | (14,2) | - | (12,0) | (12,7) | | | | (LR)OEM .35 (B) | 3.96 | 4.36 | 9/6-l8 UNF | .16 | 0.44 | 3.44 | .44 | .57 | .02 | .50 | .50 | | | | (LR)OEM .35M (B) | (|00,6) | (II0,7) | (MI6 x 1,5) | (4,0) | (ll,2) | (87,4) | (ll,2) | (|4,5) | (0,5) | (|4,0) | (|2,7) | | | | (LR)OEM .5 (B) | 3.88 | 4.35 | 3/4-l6 UNF | .19 | 0.50 | 3.31 | .63 | .67 | - | .68 | .50 | | | | (LR)OEM .5M (B) | (98,6) | (II0,5) | (M20 x 1,5) | (4,8) | (|2,7) | (84,|) | (|6,0) | (|7,0) | - | (|8,0) | (|2,7) | | | | (LR)OEM 1.0 (B) | 5.12 | 5.62 | I-I2 UNF | .25 | 0.62 | 4.09 | .87 | .55 | .18 | .88 | .50 | | | | (LR)OEM 1.0M (B) | (|30,0) | (|42,7) | (M27 x 3,0) | (6,4) | (|5,7) | (|04,0) | (22,0) | (|4,0) | (4,6) | (23,0) | (|2,7) | | | | (LR)OEM 1.0MF (B) | (|30,0) | (|42,7) | (M25 x 1,5) | (6,4) | (|5,7) | (|04,0) | (22,0) | (|4,0) | (4,6) | (23,0) | (|2,7) | | | | | | | | | | | | | | | | | | | | | | | | | | | Notes: 1. All industrial shock absorbers will function satisfactorily at 5% of their maximum rated energy per cycle. If less than 5%, a smaller model should be specified. 2. For mounting accessories, see pages 22-23. 3. (B) indicates button model of shock absorber. Buttons cannot be added to non-button models or removed from button models OEM .1M to OEM 1.0M. | | | | | | | | | | 21 | | | | | | www.enidine.com Email: industrialsales@enidine.com | | Tel.: 1-800-852-8508 ext. 111 | | | | | | Fax: 1-716-662-0406 | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
|