| | | | | | | | | | | | | | | | | | | |
| | | |
| | Construction • Positive electrodes - die-cast tubular plates with low antimony lead alloy for longer life • Negative electrodes - pasted flat plates provide perfect balance with the positive plates to give maximum performance • Separators - special microporous material • Containers - moulded from durable, transparent styrene acrylonitrile (SAN) to allow electrolyte level and cell condition to be monitored visually • Cell lids - made of opaque ABS sealed to container to ensure no electrolyte leakage • Electrolyte - diluted sulphuric acid with a specific gravity of 1.240 ±0.010 (maximum level) at 20°C for a fully charged cell | • Terminals - lead alloy leakproof pole with brass insert designed to give minimum resistance and maximum current flow • Vent plugs - safety plugs equipped with flame arrestors. Special vent plugs allowing topping-up and S.G. reading without the need to remove them, are available on request • Connectors - fully insulated, solid copper inter-cell connectors allow voltage measurements Installation & Operation • Recommended float charge voltage: 2.23Vpc (20°C/68°F - 25°C/77°F) • Recommended temperature range: + 10°C/+50°F to +30°C/+86°F (preferred value 20°C/68°F) | • Topping-up intervals of about 3 years in standby operation mode thanks to large electrolyte reserve • Can be installed on steel or wooden racks Standards • Compliant with both the international standard IEC 60896-11 and the DIN standard 40736-1 • Batteries must be installed in accordance with safety standard EN 50272-2 and national regulations • EnerSys® manufacturing facilities worldwide are ISO 9001:2000 certified | |
| | | |
| | | |
| | | |
| | | | | | | | |
| | | | | | | | | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | EnerSys EnerSys Europe EnerSys Ltd. P.O. Box 14145 Zurich, Switzerland Rake Lane, Reading, PA 19612-4145 Tel: +41 (0)44 215 74 10 Clifton Junction, | | |
| | | |
| | USA Tel: +1-610-208-1991 +1-800-538-3627 Fax: +1-610-372-8613 | EnerSys Asia Guangdong, China Tel: +86-755-2689 3639 | Swinton, Manchester M27 8LR, UK Tel: +44 (0)161 794 4611 Fax: +44 (0)161 727 3809 | © 2007 EnerSys. All rights reserved. Trademarks and logos are the property of EnerSys and its affiliates unless otherwise noted. | | |
| | | | |
| | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | | | | |