Text version of the page

DATASHEET

Luminescence Sensor - 30430 UVX-300G-CLuminescence

Functions

OPERATING MODEThe UVX-300G-C is in operating mode in detect or undetect state.REFLECTED UV LEVELDisplays the relative reflection intensity. CALIBRATIONAllows adjustment of sensitivity. THRESHOLDDisplays the preset detection level. MANUALPROGRAM MODESwitches the UVX-300G-C to PROGRAM MODE. SETTHRESHOLDSets the detect level. SETUV LED INTENSITYSets the UV LED intensity to LO, MED, HI. SETHYSTERESIS LEVELSets the un-detect level 1–9 steps below the detect level. SETOUTPUTNO/NCSets the discrete output to NO or NC. SETDETECTION EXTEND TIMEExtends the detect output by selected time. SETLOCK / UNLOCKLocks and un-locks the UVX-300G-C pushbutton controls. TEACH MODESwitches the UVX-300G-C to TEACH MODE. TEACH DETECTSets the level of reflection at which the UVX-300G-C will detect the target.TEACH UNDETECTSets the level of reflection so UVX-300G will not detect the target. PNP/ NPNThe micro controller detects and selects the required output configuration.

OrderingInformation

UVX-300G-C Luminescence Sensor

Specifications Values Stored in Non Volatile Memory

Accessories

Supply Voltage 10–24 V DC Operational Current <60 mA THRESHOLD, NO/NC, UV LEDINTENSITY, Local LOCK/UNLOCK,DETECTION EXTEND TIME, HYSTERESIS LEVEL, TEACH DETECT, TEACH UNDETECT. Detection Range 350mm Reading Range 0 to 99 Hysteresis 10 settings On/OffDelay <150 µs

UVX-300L50

Switching Frequency 6 kHz

Indicators

50 mm focal lens

Output Pulse Stretch 0–90 ms (10 steps) 7 Segment Display LED Power ON Discrete Output Auto-Detect PNP/NPN Red LED Detect Analog Output 0–5 V Green LED Program Output Function NO/NC selectable Short Circuit Protection Yes (outputs)

Connector M12

Overload/ReversePolarity Protection Pin 1 Power 10 to 24 V DC Yes (supply voltage) Pin 2 Discrete output PNP/NPN NO/NC Remote Input LOCK/UNLOCK Pin 3 Ground Signal Strength Display Two 7 segment digits Pin 4 Analog output 0 to 5 V DC Detection Threshold Two 7 segment digits Pin 5 Remote LOCK/UNLOCK input Power Indicator 7 segment display LED Detect Indicator Red LED

Certifications

UVX-300B

Programming Indicator Green LED

Bracket

Data Retention EEPROM non-volatile memory UV Source 370 nm UV LED life 100,000 hours Receiver SpectralResponse 350 to 1000 nm Operating Temperature –20 to 55°C Storage Temperature –20 to 70 C Housing Metal alloy Mechanical Protection IP67

UVX-300C

Connector M12 5 pin

5-meter cable with M12 5 pin connector

Size 2.5” x 2” x 0.75” NOT INTENDED FOR USE INPERSONAL SAFETYAPPLICATIONS.

4564 Johnston Parkway • Cleveland, Ohio 44128Phone: 1-800-426-9912 or 216-518-9888 • Fax: 216-518-9884 Email: salessupport@emxinc.com • Web: www.emxinc.com

© EMX Industries, Inc. All rights reserved.

Revision 1.0 4-2-07