Advanced Contrast Sensor - EMX Industries Inc. - #2

/ 2


catalogue search
P. 01
P. 02
Pages:


See other catalogues for EMX Industries Inc.

Text version of the page
DATA SHEET
Advanced Contrast Sensor
Ordering Information
Functions
The CNTXTM is in operating mode in detect or undetect state.
Displays the relative reflection intensity.
Displays the preset detection level.
Switches the CNTXTM to PROGRAM MODE.
Sets the detect level.
Sets the LED intensity to LO, MED, HI.
Sets the un-detect level 1-9 steps above the detect level.
Sets the discrete output to NO or NC.
Extends the detect output by selected time.
Locks and un-locks the CNTXTM pushbutton controls.
Switches the CNTXTM to TEACH MODE.
Sets the level of reflection at which the CNTXTM will detect the target.
Sets the level of reflection so CMYXTM will not detect the target.
The micro controller detects and selects the required output configuration.
OPERATING MODE REFLECTED LEVEL THRESHOLD
MANUAL PROGRAM MODE
SET THRESHOLD
SET LED INTENSITY
SET HYSTERESIS LEVEL
SET OUTPUT NO/NC
SET DETECTION EXTEND TIME
SET LOCK / UNLOCK
TEACH MODE TEACH DETECT TEACH UNDETECT
PNP/NPN
CNTX-30-0
Contrast Sensor
Accessories
Specifications
White light source
Values Stored in Non Volatile Memory
THRESHOLD, NO/NC, LED INTENSITY,
Local LOCK/UNLOCK, DETECTION EXTEND TIME, HYSTERESIS LEVEL, TEACH DETECT, TEACH UNDETECT.
Indicators
7 Segment Display LED Green LED Power
Red LED Detect
Yellow LED Program
Broad spectrumLED min. 100,000 hours 28mm 3.0mm dia.
<5% @ +/- 2mm from focal point
<150uS
6Khz
3 levels
00 to 50
Sensing distance Spot size
Distance Variation Sensitivity
Response time Switching frequency LED intensity
Relative intensity display range Sensitivity Signal level Detection threshold Digital output Output function Security
Power indicator Detect indicator Programming indicator Data retention Dimensions
Weight
Supply voltage Operating current Short circuit protection Overload / reverse Polarity protection Operating Temperature Storage Temperature Housing
Mechanical Protection
UVX-300B
Bracket
1X, 10X
Two 7 segment digits Two 7 segment digits Autodetect NPN / PNP NO/NC selectable LOCK / UN-LOCK keypad
Connector M12
Pin 1 Power 10 to 24 V DC
Pin 2 Discrete output PNP/NPN NO/NC
Pin 3 Ground
Pin 4 Analog output 0 to 5 V DC
Pin 5 Remote LOCK/UNLOCK input
UVX-300C
5-meter cable with M12 5 pin connector
Green LED Red LED Yellow LED
EEPROM non-volatile memory 2.0"(51 mm)x2.4"(61 mm)x1.0"(25mm) 0.21lbs. (95g) 10 - 24 VDC
60 mA
Discrete output
Supply voltage -20 to 55°C -20 to 70 C Metal alloy IP67
NOT INTENDED FOR USE IN PERSONAL SAFETY
APPLICATIONS.
4564 Johnston Parkway • Cleveland, Ohio 44128
Phone: 1-800-426-9912 or 216-518-9888 • Fax: 216-518-9884
Email: salessupport@emxinc.com • Web: www.emxinc.com
Made In U.S.A
:
INDUSTRIES, INC.
© EMX Industries, Inc. All rights reserved. REV. 1.0 11/21/2007

pageCatalog pdf di En 2012-05-22-29