Pumps and valves
48Pages

{{requestButtons}}

Catalog excerpts

Pumps and valves - 1

Pumps and valves SWISS ENGINEERED PUMPS SINCE 1947

Open the catalog to page 1
Pumps and valves - 2

Pump room in wastewater treatment plant Werdhölzli at Zürich, Switzerland

Open the catalog to page 2
Pumps and valves - 3

Pumps and valves Turo® Vortex Pumps T Turo® Vortex Pumps TA for raw sewage Process Pumps EO / EOS Elbow Pumps RPP/RPG Special Pumps: Reactor Pumps HT   HPT / Special Pumps: Submerged Pumps SOT   SMT / Special Pumps: Submerged Pumps SG / SGD (Zone 0) Special Pumps: Cantilever Pumps SOG Special Pumps: Pilot Pumps S Iris® Diaphragm Control Valve Varioseal shaft seals Hydrodynamic shaft seal Eurodyn Pump Designs (dry and wet mounted) Materials 38 Egger Global Customer Service

Open the catalog to page 3
Pumps and valves - 4

Turo® Vortex Pumps T Turo® Vortex Pumps with a completely open spherical channel. Only 15  of the pumped fluid comes into contact with the % impeller. Around the world, thousands of pumps have proven themselves with decades of excellent service.

Open the catalog to page 4
Pumps and valves - 5

Applications · Chemical and crystalline suspensions · Numerous abrasive and corrosive fluids · All viscous materials · High concentrations of fibrous suspensions · Municipal and industrial wastewater · Every kind of sludge Reference industries and fluids The Egger Turo® Vortex Pumps have the capability to handle challenging liquids gently and without any risk of clogging. Features · Gentle pumping of sensitive liquids, such as salt crystal · Special volute casing, tuned to the hydraulics · Chemical industry · Petrochemical industry · Waste water treatment · Automotive industry · Building...

Open the catalog to page 5
Pumps and valves - 6

Turo® Vortex Pumps TA Patented Turo® Vortex TA impeller for pumping of raw m uni ipal sewage with a high content of fibers without clogc ging. Fully recessed impeller for maximal free passage.

Open the catalog to page 6
Pumps and valves - 7

Applications · Raw sewage · Municipal and industrial wastewater · Sludge with a high content of fibers · All viscous media · Suspensions with a high content of fibers Features · Pumping raw sewage without clogging · Patented vortex hydraulics · Special axial spiral casing, tuned to the hydraulics · Interchangeable with Turo® T, TV and TEO Facts & Figures Dimensions: DN 80 – 200 mm 3 –  8" Flow rate: bis 180 l / s 2850 US gpm Diff. head: up to 100 m / 330 ft  Pressure: up to 16 bar 230 psi Temperature: up to 130°C 265°F The Turo® TA impeller is capable of pumping raw municipal sewage with a...

Open the catalog to page 7
Pumps and valves - 8

Turo® Vortex Pumps T / TA (Continuation) Hydraulics for Turo® Vortex Pumps T / TA The vortex impeller is an «open» impeller whereby power transfer to the fluid being transported is comparable to the principle of a hydraulic coupling. It is fundamentally different from classic non-clog impellers. Egger, known as the pioneer in vortex impeller development, has been rigorously optimising their special hydraulic properties to the present day. Various impeller variations have resulted from this, offering optimal conditions for each application. Insensitivity to abrasion – gentle transport As a...

Open the catalog to page 8
Pumps and valves - 9

Non-clogging, safe delivery rate due to the recessed impeller and a patented axial spiral Totally recessed impeller Patented axial spiral Turo® TA impeller for raw waste water Special impeller for pumping raw sewage in municipalities with high levels of textiles that tend to wrap around the blades. Fully integrated into our Turo® vortex pump’s modular system, the impeller is hydraulically optimised for this requirement.

Open the catalog to page 9
Pumps and valves - 10

Process Pumps EO/EOS The high-performance pump for homogeneous liquids containing high concentrations of solids and high gas content. Different numbers of impeller blades for large and small particle sizes.

Open the catalog to page 10
Pumps and valves - 11

Applications · Demanding fluids in the chemical and petrochemical industries · Multiphase mixtures for reactor loops · Aerated fibre suspensions in the pulp and paper industry · Wastewater and aggressive fluids in wastewater technology · Sludges · Numerous abrasive and corrosive fluids Features · Pumping of fluids with gas contents up to 25  vol. % · Semi-open impeller · Different numbers of blades Facts & Figures Dimensions: DN 50–500 mm 2–20" Flow rate: up to 1500 l/s 23800 US gpm Diff. head: up to 150 m 492 ft Pressure: up to 30 bar 440 psi Temperature: up to 180°C / 365°F Reference...

Open the catalog to page 11
Pumps and valves - 12

Process Pumps EO/EOS (Continuation) Hydraulics for Process Pumps EO/EOS The semi-open radial impeller with special profile is a logical development of the original Egger impeller. The EO and EOS impeller family is mainly distinguished by the number of blades. Transport of fluids with high gas content – high suction capability Ordinary radial impellers are known for their limited gas handling capability which results in a drastic reduction of the output to the point where delivery stops altogether. Our special blade geometry guarantees the delivery of fluids with a gas content up to 25  , %...

Open the catalog to page 12
Pumps and valves - 13

High efficiency pumps for homogeneous slurries containing high concentrations of solids Impeller models EOSA: For freedom from clogging by particles and fibres The triple-bladed EOSA-impeller has a larger, open spherical channel than the EO-impeller and is used primarily for slurries and suspensions of larger solids. The blade leading edge and the opposing wear plate have special designs that make it possible to transport even long-fibre components, such as occur in wastewater. Transport of high consistency paper pulp and more Egger has been known for decades for pulp pumps in the pulp and...

Open the catalog to page 13
Pumps and valves - 14

Hybrid Pumps TEO Patented Vortex Pump with a hybrid impeller. Combines the advantages of our semi-open impeller with those of a Turo® Vortex impeller.

Open the catalog to page 14
Pumps and valves - 15

Applications ·· Grinding oil emulsions with a high proportion of air ·· Emulsions with chips in the automotive industry ·· SiC slurries in the solar industry ·· Sewage sludge in the waste water technology Features ·· Stable suction characteristic during the transport of fluids with up to 10% gas content ·· Interchangeability with a Turo® Vortex impeller Facts & Figures Dimensions: DN 32 – 80 mm 1¼ – 3" Flow rate: up to 35 l / s 550 US gpm Diff. head: up to 30 m 100 ft Pressure: up to 10 bar 145 psi Temperature: up to 80 °C 175 °F Advantages ·· High efficiency, also with viscous fluids ··...

Open the catalog to page 15

All Emile Egger & Cie SA catalogs and technical brochures

  1. Pump seals

    4 Pages