Maxxturn 95 - EMCO - #6

Text version of the page

Work area Swing over bed 700 mm (27.6") Swing over cross slide 500 mm (19.7") Distance between centers 1230 mm (48.4") Maximum turning diameter 450 mm (17.7") Maximum part length 1100 mm (43.3") Draw tube diameter 95 mm (3.7") Travel Travel in X 303 mm (11.9") Travel in Z 1160 mm (45.7") Travel in Y -60/+80 mm (-2.4/+3.1") Main spindle Speed range 0 – 3500 rpm Max. drive performance 33 kW (44.2 hp) Max. torque on the spindle 800 Nm (589.6 ft/lbs) Spindle nose DIN 55026 A2-8 Spindle bearing (inside diameter at front) 160 mm (6.3") Spindle bore 106 mm (4.2") C-axis Round axis resolution 0,001° Rapid motion speed 1000 rpm Tailstock with quill Tailstock travel 850 mm (33.5") Maximum application force 12500 N (2810 lbs) Max. Traverse speed 4 m/min (157.5 ipm) Tool holding shaft (with integrated bearings) MT4 Tool turret Number of tool positions 12+12 Tool holding shaft in accordance with VDI (DIN 69880) 40 mm (1.6") Tool cross-section for square tools 25 x 25 mm (1 x 1") Shank diameter for boring bars 40 mm (1.6") Turret indexing time 0.4 sec Driven tools Number of driven tool positions 12 Maximum speed 0 – 4000 rpm Maximum torque 35 Nm (25.8 ft/lbs) Maximum drive performance 8 kW (10.7 hp) Feed drive Rapid motion speed X/Z/Y 24/30/12 m/min (944.9/1181.1/472.4 ipm) Feed force in the X axis 9000 N (2023.2 lbs) Feed force in the Z axis 13000 N (2922.4 lbs) Feed force in the Y axis 9000 N (2023.2 lbs) Acceleration time from 0 to rapid motion 0.2 sec Coolant system Tank volume 350 liters (92.6 gal) Pump performance at 3.5 bar 0.57 kW (0.8 hp) Power consumption Connected load 46 kVA Pneumatic load 6 bar (87.02 PSI) Consumption approx. 300 l/h (80 gal/h) Dimensions Height of centers above floor 1135 mm (44.7") Machine height 2200 mm (86.6") Required space for machine W x D 4750 x 2050 mm (without chip conveyor) (187 x 80.7") Total weight approx. 10400 kg (22928 lb) Safety devices CE compliant [Technical data] EMCO MAXXTURN 95 EN4339 . 04/09 . Subject to change due to technical progress. Errors and omissions excepted. EMCO MAIER Ges.m.b.H. Salzburger Str. 80 . 5400 Hallein-Taxach . Austria Phone +43 6245 891-0 . Fax +43 6245 869 65 . info@emco.at www.emco-world.com