See other catalogues for
EMCO
You may also be interested in
Text version of the page
Working area
Swing over bed 325 mm (12.8")
Swing over cross slide 150 mm (5.9")
Main spindle/counter spindle distance 485 mm (19”)
Maximum turning diameter 114 mm (4.5")
Maximum part length 315 mm (12.4")
Maximum bar diameter 25.4 mm (1")
Travel
Travel in X 100 mm (3.9")
Travel in Z 320 mm (12.6")
Travel in Y +20/–15 mm (0.78”/-0.59")
Travel in in Z2 350 mm (13.8")
Main spindle
Speed range 0 – 8000 rpm
Torque at spindle 30 Nm (22.1ft/lbs)
Spindle nose ř70 h5
Spindle bearing 60 mm (2.36")
Spindle bore hole 33 mm (1.3")
Counter spindle
Speed range 0 – 8000 rpm
Torque at spindle 20 Nm (14.7 ft/lbs)
Spindle nose ř70 h5
Spindle bearing 45 mm (1.77")
C axis
Resolution 0.001°
Rapid motion speed 1000 rpm
Spindle indexing 0.01°
Drive power
Main spindle 6.5 kW (8.7 hp)
Counter spindle 3.5 kW (4.7 hp)
Tool turret
Number of tool positions 12
Number of indexing positions 36
VDI shaft (DIN 69880) VDI16
Tool cross-section for square tools 12 x 12 mm
(0.47” x 0.47")
Tool turret
Shaft diameter for boring bars 16 mm (0.63")
Turret indexing time 0.2 sec
Driven tools
Speed range 0 - 6000 rpm
Maximum torque 4 Nm (2.9 ft/lbs)
Maximum drive power 1.2 kW (1.6 hp)
Number of driven tools 6
Feed drives
Rapid motion speed X/Y/Z 20/10/30 m/min
(787/394/1181 ipm)
Feed force in the X/Y/Z axis 3000/4000/4000 N
(674/900/900 lbs)
Positioning scatter VDI 3441 in X/Y/Z 3,5/3/3,5
(0,00014/0,00012/0,00014")
Coolant system
Tank volume 140 Liter (37 gal)
Pump power standard 0.57 kW (2.2 hp)
Pump capacity at 3,5bar/1bar 15/65 l/min (4/17.2 gal/min)
Pump capacity at 14 bar/6 bar (optional) 10/60 l/min
(2.6/15.8 gal/min)
Power consumption
Connected load 12 kVA
Compressed air 6 bar (87 PSI)
Dimensions and weight
Height of spindle center above floor 1140 mm (45")
Total machine height 1870 mm (73.6")
Foot print (without chip conveyor) LxD 2180 x 1425 mm
(85.8" x 56.1")
Total weight 2100 kg (4630 lb)
Safety devices CE conform
[Technical data]
EMCO MAXXTURN 25
EMCO MAIER Ges.m.b.H.
Salzburger Str. 80 . 5400 Hallein-Taxach . Austria
Phone +43-62 45-8 91-0 . Fax +43-62 45-8 69 65 . info@emco.at
EN4580 . 11/08 . Subject to change due technical progress. Errors and omissions excepted.
www.emco-world.com
