Emcoturn E45 - EMCO - #8

Text version of the page

Bar length 100–800 mm (3.9–31.5") Bar diameter Ø 6–45 mm (0.24–1.77") Material storage 13 bars of Ø 45 mm (1.8") Length 1200 mm (47.4") Width 1100 mm (43.3") Weight approx. 330 kg (727.5 lb) Work area Swing over bed Ø 430 mm (16.9") Swing over cross slide Ø 210 mm (8.3") Distance between centers 600 mm (23.6") Maximum turning diameter Ø 220 mm (8.7") Maximum part length 510 mm (20.1") Maximum bar-stock diameter Ø 45 mm (1.77") Travel Travel in X 160 mm (6.3") Travel in Z 310 mm (12.2") Spindle Speed range 0 – 6300 rpm Drive performance 13 kW (17.4 hp) Spindle torque 78 Nm (57.5 ft/lbs) Spindle nose DIN 55026 A2-5 Spindle bearing (inner diameter at front) 80 mm (3.1") Spindle bore 53 mm (2.1") C axis Resolution 0.001° Rapid motion speed 1000 rpm Spindle indexing 0.01° Tool turret Number of tool positions 12 Tool holding shaft in accordance with VDI (DIN 69880) 30 Tool cross-section for square tools 20 x 20 mm (0.78 x 0.78") Shank diameter for boring bars Ø 32 mm (1.3") Turret indexing time 0.14 sec Driven tools DIN 5480 Number of stations 6 Drive performance 4 kW (5.4 hp) Maximum torque 16 Nm (11.8 ft/lbs) Speed range 0 – 5000 rpm Feed drives Rapid motion speed X/Z 20/24 m/min (787.4/944.9 ipm) Feed force in the X/Z axes 4000/6000 N (899.2/1348.8 lbs) Time from 0 to rapid motion 0.1 sec Position variation Ps 0.0035/0.004 mm (according to VDI 3441) X/Z (0.00014/0.00016") Tailstock Quill stroke 120 mm (4.7") Quill diameter Ø 60 mm (2.4") Quill thrust 5000 N (1124 lbs) Quill bore taper MT 4 Coolant system Tank volume 230 liters (60.8 Gal) Pump performance 0.57 kW (0.77hp) Dimensions Height of center above floor 1152 mm (45.4") Machine height 1940 mm (0.24-1.77") Required space for machine (LxD) 2250 x 1630 mm (88.6 x 64.2") Total weight 3300 kg (7260 lb) [Technical data] EMCOTURN E45 EMCO COMPACT LOAD E45 EMCO MAIER Ges.m.b.H. Salzburger Str. 80 . 5400 Hallein-Taxach . Austria Phone +43 6245 891-0 . Fax +43 6245 86965 . info@emco.at www.emco-world.com EN4543 . 04/09 . Technical modifications reserved. Errors and omissions excepted.