Emcomat E-300 / E-360 / E-400 / E-480 - EMCO - #12

Text version of the page

EN3501 . 04/09 . Subject to change due to technical progress. Errors and omissions excepted. EMCO MAIER Ges.m.b.H. Salzburger Str. 80 . 5400 Hallein-Taxach . Austria Phone +43 6245 891-0 . Fax +43 6245 86965 . info@emco.at www.emco-world.com [Technical data] EMCOMAT E300 - E360 - E400 - E480 Work area Distance between centers 1500 – 3000 mm 1500 – 6000 mm 1500 – 6000 mm 1500 – 6000 mm (59.1"–118.1") (59.1"–236.2") (59.1"–236.2") (59.1"–236.2") Swing 275 mm (10.8") 380 mm (14.9") 430 mm (16.9") 510 mm (20.1") Swing over bed Ø 570 mm (22.4") Ø 810 mm (31.9") Ø 900 mm(35.4") Ø 1050 mm (41.3") Swing over slide Ø 340 mm (13.4") Ø 480 mm (18.9") Ø 580 mm (22.8") Ø 740 mm (29.1") Bed width. hardened HRC 50 420 mm (16.5") 500 mm (19.7") 500 mm (19.7") 500 mm (19.7") Travel in Z 1500 – 6000 mm 1500 – 6000 mm 1500 – 6000 mm 1500 – 6000 mm (59.1"–236.2") (59.1"–236.2") (59.1"–236.2") (59.1"–236.2") Travel in X 310 mm (12.2") 520 mm (20.5") 520 mm (20.5") 520 mm (20.5") Feed power X max. 1000 daN 1900 daN 1900 daN 1900 daN Feed power Z max. 1500 daN 1900 daN 1900 daN 1900 daN Rapid motion speed in X/Z 5 (8*) m/min 5 (8*) m/min 5 (8*) m/min 5 (8*) m/min (197 (315*) ipm) (197 (315*) ipm) (197 (315*) ipm) (197 (315*) ipm) Cross-slide width 250 mm (9.8") 286 mm (11.3") 286 mm (11.3") 286 mm (11.3") Lathe tool cross-section 25 x 25 mm 32 x 32 (40 x 40) mm 32 x 32 (40 x 40) mm 32 x 32 (40 x 40) mm (0.98"x0.98") (1.3"x1.3") (1.6"x1.6") (1.3"x1.3") (1.6"x1.6") (1.3"x1.3") (1.6"x1.6") Moving spindlel Spindle nose DIN 55029 Camlock 8 11 11 11 Spindle bore Ø 108 mm (4.3") Ø 153 mm (6.0") Ø 153 mm (6.0") Ø 153 mm (6.0") Spindle front bearing (inside diameter) Ø 160 mm (6.3") Ø 235 mm (9.3") Ø 235 mm (9.3") Ø 235 mm (9.3") Faceplate diameter (max.) Ø 500 mm (19.7") Ø 700 mm (27.6") Ø 800 mm (31.5") Ø 900 mm (35.4") Maximum chuck diameter Ø 315 mm (12.4") Ø 500 mm (19.7") Ø 500 mm (19.7") Ø 500 mm (19.7") Spindle rotational speed 0 – 2500 rpm 0 – 1200 rpm 0 – 1200 rpm 0 – 1200 rpm Speed control stepless stepless stepless stepless Mechanical speed levels 1 2 2 2 Drive motor AC motor infinitely variable infinitely variable infinitely variable infinitely variable Performance at 40/100% duty cycle 25/17 kW 33/22 kW 33/22 kW 33/22 kW (33.5/22.8 hp) (44.3/29.5 hp) (44.3/29.5 hp) (44.3/29.5 hp) Max. torque at the main spindle 764/519 Nm 3151/2101 Nm 3151/2101 Nm 3151/2101 Nm Tailstock Quill diameter Ø 100 mm (3.9") Ø 120 mm (4.7") Ø 120 mm (4.7") Ø 120 mm (4.7") Inner quill taper MK 5 MK 6 MK 6 MK 6 Quill travel 220 mm (8.7") 220 mm (8.7") 220 mm (8.7") 220 mm (8.7") Power supply Electricity supply 400 V/3~/PE 400 V/3~/PE 400 V/3~/PE 400 V/3~/PE Frequency 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz Connected load 24 kVA 39 kVA 39 kVA 39 kVA Dimensions Machine length Sp.W.+2160 mm (85.0") Sp.W.+3060 mm(120.5") Sp.W.+3060 mm(120.5") Sp.W.+3060 mm(120.5") Machine width 2130 mm (83.9") 2470 mm (97.2") 2470 mm (97.2") 2540 mm (100.0") Machine height 1840 mm (72.4") 2070 mm (81.5") 2070 mm (81.5") 2300 mm (90.6") Total weight 3600 – 4500 kg 7500 – 10500 kg 7700 – 10700 kg 8000 – 11000 kg EMCOMAT-E300 EMCOMAT-E360 EMCOMAT-E400 EMCOMAT-E480