EMCOMAT 14S/14D – 17S/17D – 20D - EMCO - #8

Text version of the page

EMCO MAIER Ges.m.b.H. Salzburger Str. 80 . 5400 Hallein-Taxach . Austria Phone +43-62 45-8 91-0 . Fax +43-62 45-8 69 65 . info@emco.at www.emco-world.com [Technical Data] EN3381 . 10/08 . Subject to change due to technical progress. Errors and omissions excepted. Working area Distance between centers 650 mm (24.6“) 700 mm (27.6“) 700/1000 mm (27.6/39.4“) Height of centers 140 mm (5.5“) 170 mm (6.7“) 170/200 mm (6.7/9.7“) Swing over bed 280 mm (11.0“) 340 mm (13.4“) 340/400 mm (13.4/15.7“) Swing over cross slide 170 mm (6.7“) 190 mm (7.5“) 190/250 mm (7.5/9.8“) Longitudinal slide 590 mm (23.2“) 600 mm (23.6“) 600/900 mm (23.6/35.4“) Longitudinal slide over cross slide 135 mm (5.3“) 220 mm (8.7“) 220 mm (8.7/“) Longitudinal slide of upper slide 100 mm (3.9“) 110 mm (3.9“) 110 mm (3.9“) Cross section of cutting tool 12 x 12 mm (0.5 x 0.5“) 20 x 20 mm (0.8 x 0.8“) 20 x 20 mm (0.8 x 0.8“) Main spindle Spindle nose CAMLOCK DIN 55029 S4 CAMLOCK DIN 55029 S5 CAMLOCK DIN 55029 S5 Spindle bore Ø 40 mm (1.6“) Ø 50 mm (2“) Ø 50 mm (2“) Face plates diameter max. 152 mm (5.9“) 200 mm (7.9“) 200/260 mm (7.9/10.2“) Chuck diameter max. 140 mm (5.5“) 200 mm (7.9“) 200 mm (7.9“) Spindle speed 60 – 4000 rpm 55 – 2350 rpm 40 – 3000 rpm Rotational speeds stepless mechanical stepless Speed ranges 2 8 4 Speed ranges 60 – 2 000 55, 95, 160, 280, 470 40 – 130, 110 – 360 2000 – 4000 rpm 800, 1320, 2350 rpm 310–1070, 870 – 3000 rpm Drive motor Power 7.5 kW (10.1 hp) 3.2 kW (4.3 hp) 5.3 kW (7.1 hp) Feed range Longitudinal feed* 0,03 – 0,3 mm/rev 0,045 – 0,787 mm/rev 0,045 – 0,787 mm/rev (0.001–0.01“/rev) (0.002–0.031“/rev) (0.002–0.031“/rev) Cross feed* 0.015 – 0.15 mm/rev 0.023 – 0.406 mm/rev 0.023 – 0.406 mm/rev (0.0006–0.006“/rev) (0.0009–0.0016“/rev) (0.0009–0.0016“/rev) Cutting speeds Metric threads (basic elements) 15 (0.25 – 2.5 mm/0,010–0,098“) 20 (0.4 – 7.0 mm/0,0157–0,2755“) 20 (0.4 – 7.0 mm/0,0157–0,2755“) Metric threads* 13 (0.125 – 5 mm/0.005–0.2”) 28 (0.4 – 7 mm/0.02–0.3”) 28 (0.4 – 7 mm/0.02–0.3“) Imperial threads* 29 (96 – 4 Gg/Zoll) 32 (4 – 56 Gg/Zoll) 32 (4 – 56 Gg/Zoll) Module screw threads* 12 (0.25 – 2.5) 28 (0.2 – 3.5) 28 (0.2 – 3.5) Diam. pitch threads* 25 (96 – 11) 32 (8 – 112) 32 (8 – 112) Tailstock Quill diameter 30 mm (1.2“) 50 mm (2“) 50 mm (2“) Inner quill taper MK 2 MK 3 MK 3 Quill stroke 80 mm (3.1“) 120 mm (4.7“) 120 mm (4.7“) Lateral displacement +10/– 8 mm (+0.4/–0.3”) +/–13 mm (+/–0.5“) +/–13 mm (+/–0.5“) Noise levels Max. noise level DIN 45635 77 dB(A) 79 dB(A) 79 dB(A) Tool weight permitted Floating 45 kg 50 kg 50 kg With tailstock 80 kg 150 kg 150 kg Power supply Power supply 400 V/3 PE/50(60) Hz 400 V/3 PE/50 Hz 400– 440 V/3 PE/50(60) Hz General data L x H x B of the machine 1280 x 730 x 1480 mm 1650 x 1060 x 1290 mm 1650/1950 x 1060 x 1635 mm (50.4 x 28.7 x 58.3“) (65 x 41.7 x 50.8“) (65 x 41.7 x 50.8“) Moving spindle above ground 1100 mm (43.3“) 1103 mm (43.4“) 1103 mm (43.4“) Total weight 243 kg 725 kg 755/865 kg EMCOMAT 14S/14D EMCOMAT 17S EMCOMAT 17D/20D *The feed range and the number of threading methods can be extended using the change gears (optional).